Create this 3D-Model part and the drawing? I would like to compare to how it should look professionally
Create the following 3D-model part, Roller -- Model TX from the drawing views provided below. Add your choice of appropriate material. Save your part accordingly. Next, generate a multi-view drawing in Solidworks. Add all required views (don't forget your section view) and annotations required to properly describe the part. Please check over your drawing carefully and save properly.
I need at least a front view, aligned section view and a pictorial view
Accepted answer
I took a look and have some recommendations.
Using the rotation extrude is absolutely the right choice here. However, some of your sketch entities linked to the rotation feature are floating (indicated by blue lines and points). I always recommend fixing the sketch entities to the origin. In this case, align them at the mounting side with the 4" diameter and the rotation axis.
Your holes don't meet the "equally spaced" condition described in the drawing. I would recommend using a rotational pattern. Define just one hole on the pitch diameter and use the rotational pattern to create the rest. This way, editing the number of holes is super easy if you need more or fewer.
I've attached my .prt file for reference.
Have a great weekend! =)
3 Other answers
I have another suggestion: You do your homework and post it here. And we will professionally critique it.
As Jack said, do your homework yourself first. I've already created a drawing and will upload it once you're done with yours =)
This is what I created
