A hard time for me to figure out that nozzle

MALLIAS

27 Sep, 2015 06:03 PM

Here is the way to do it:

1. Step 1:

   1. You vertical sketch has a problem. Delete the line on the flat face and draw it again to create a closed loop.
   

   

2. Step 2:

   2. Open the loft tool and select the 2 closed sketches you created as profiles.
   

   

3. Step 3:

   3. Select the open sketch as guide curve
   

   

4. Step 4:

   4. Mirror the new loft.
   Good luck.