AutoCAD tutorial|Flange and Tube design in AutoCAD
In this video, designing of flange and tubes are explained in AutoCAD.
Flange and tubes are most widely used in Automobile applications and piping for carrying fluids.
In this video, the following comments are used:
Line - For creating the sketches in 2D window
Circle - For creating the sketches in 2D window
Join - To join multiple segment as single segment for extruding
Trim - for trimming the excess curves and lines
Erase - for erasing the undesired parts in sketch
Presspull - to extrude the cross section in different thickness
Sweep - to create the tube part
Subtract - to make the hollow tube
-
Step 1: AutoCAD tutorial|Flange and Tube design in AutoCAD
Watch the below video from Youtube :
Commands used for modeling:
Line - For creating the sketches in 2D window
Circle - For creating the sketches in 2D window
Join - To join multiple segment as single segment for extruding
Trim - for trimming the excess curves and lines
Erase - for erasing the undesired parts in sketch
Presspull - to extrude the cross section in different thickness
Sweep - to create the tube part
Subtract - to make the hollow tube
