Bottle Opener

This is the tutorial for the bottle opener of the Swiss Army Knife

  1. Step 1:


    Make first straight line of 8 mm (bottom of the picture), make the other straight line (left hand side) of 37 mm. After that make small line of 3.2 mm and 11.45 mm. Finally make straight line (right hand side) of 29 mm. Make circle to make hole with the diameter of 2 mm.

  2. Step 2:

    Extrude the body with distance of 1.6 mm




  3. Step 3:


    And the bottle opener is finished

Comments