Tutorials

  • Design & CAD ×
  • Composites ×
  • Measurement / Inspection ×
  • FEM ×
  • Kinematics ×
  • Alibre Design ×
  • Lagoa ×
  • Powermill ×
  • TinkerCAD ×
  • ViaCAD 3D ×

problem : powermill changes the orientation of files imoprted in igs format from solidworks

Sourbh
in Design & CAD
1 0 Intermediate
Don't worry about the orientation just simply rotate it through your mouse. and If you are thinking of wrong axis direction than just follow these steps:-
Powermill solidworks powermill

Lobsterback Duct Bends Sheetmetal Method

lawrie
in Modeling
1 0 Beginner
This is the method I use to construct lobster back bends with sheet metal tools that I can produce flat patterns from, These flat patterns can then be used to produce files for CNC profile cutting machines. I have come across other ways of doing this using surfaces, thickened and turned into sheet metal parts. The software I am using is Alibre Design. As the version I have is low on surfacing tools I have found this a good way to model lobster back bends, which I have been involved with the design and manufacture for many years.
Alibre Design

FREE - TINKERCAD - TUTORIAL

nikhil satpute
in Modeling
1 0 Beginner
Don't need to download any software, it is freely available online This tutorial will help to design 3D blocks very easily , just go through my video lectures on Tinkercad on my youtube channel
TinkerCAD technicaldrawing engineeringdrawing engineering tinkercad

Variable Geometry Patterns

Konstantinos Froudarakis
in Modeling
1 0 Intermediate
Two way to create geometry patterns where every instance has a different geometry. And both ways can do it in a parametrically controlled way.
Alibre Design patterns parametrically controlled variable patterns parametric variable pattern

Parametric Multitasking: Global Parameters in Alilbre!

Konstantinos Froudarakis
in Modeling
1 0 Expert
How to use Global Parameters in Alibre!
Alibre Design multiple parts at once multitasking global parameters math equation editor

Exhaust Manifold in ALibre!

Konstantinos Froudarakis
in Modeling
1 0 Intermediate
In this video I show how to design an Exhaust Manifold in Alibre based on a drawing that came up in a question in the Alibre Forums. Enjoy!
Alibre Design sweep direct editing remove face pipe 3d sketch manifold exhaust

Autodesk TinkerCAD Basics

A VIJAY
in Modeling
1 1 Expert
Hello my name is Vijay and I am a designer in TinkerCAD. This tutorial is to learn the basics of TinkerCAD from Noob to proffesional.You can also ask any questions regarding in the designing of TinkerCAD.
TinkerCAD

Tutorials:-Working with Power MILL "PART V" Toolpath Leads and Links

Sourbh
in Design & CAD
1 0 Intermediate
Hello Friends, This tutorial continues for power mill Guidance.
Powermill paths sourbh powermill lead links tool

Tutorials:-Working with Power MILL "PART V" Toolpath Leads and Links

Sourbh
in Design & CAD
1 0 Intermediate
Z Heights Skim and Plunge distance provide variable control of rapid move heights within a component. These operate in conjunction with Safe Z and Start Z to minimize slow and unnecessary movement of the tool in fresh air while machining the component form. Skim distance – An incremental distance above the model at which rapid moves occur from the end of one tool track to the start of the next. The tool rapids across the model clearing the highest point along its route by the Skim value. Plunge distance – An incremental distance above the local component surface where a downward rapid movement of a tool changes to plunge rate.
Powermill paths sourbh powermill lead links tool

Tutorials:-Working with Power MILL "PART V" Toolpath Leads and Links

Sourbh
in Design & CAD
1 1 Intermediate
Links To provide for more efficient movement of the tool across the component the link moves that connect adjacent tool tracks can be defined in several different ways. Short/Long Threshold - This defines the distance limit up to which the Short - Links apply. Any move from the end of a tool track to the start of the next, which exceeds this distance is defined as a Long - Link move. For Short links the available options include Safe Z, Incremental, Skim, On Surface, Stepdown, Straight, and Circular Arc. For Long links the available options include Safe Z, Incremental, and Skim. Safe links apply only at the start and end of a toolpath the available options being Safe Z, Incremental, and Skim. For applications where a machine control system will permit arc fitting of rapid moves the Arc Fit Rapid Moves box can be ticked along with a suitable Radius based on the active tool diameter TDU (Of particular benefit to High Speed Machining). •Activate the toolpath 1_1 created earlier in the Leads section. •Set the Leads In and Out to None, if not already set. Press Apply.
Powermill paths sourbh powermill lead links tool

3D Surface Texture Application in Alibre

Konstantinos Froudarakis
in Modeling
1 0 Expert
A cool little trick to get a sculptured surface onto a [art and have it adapt parametrically. It works especially well for prismatic parts.
Alibre Design parametric surfacing boolean sheet metal uv unwrap surface
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.