Tutorials

  • Design & CAD ×
  • IronCAD ×
  • Mastercam ×
  • Powermill ×
  • Text file ×

Tutorials:-Working with Power MILL "PART V" Toolpath Leads and Links

Sourbh
in Design & CAD
1 0 Intermediate
Hello Friends, This tutorial continues for power mill Guidance.
Powermill paths sourbh powermill lead links tool

Tutorials:-Working with Power MILL "PART V" Toolpath Leads and Links

Sourbh
in Design & CAD
1 0 Intermediate
Z Heights Skim and Plunge distance provide variable control of rapid move heights within a component. These operate in conjunction with Safe Z and Start Z to minimize slow and unnecessary movement of the tool in fresh air while machining the component form. Skim distance – An incremental distance above the model at which rapid moves occur from the end of one tool track to the start of the next. The tool rapids across the model clearing the highest point along its route by the Skim value. Plunge distance – An incremental distance above the local component surface where a downward rapid movement of a tool changes to plunge rate.
Powermill paths sourbh powermill lead links tool

Tutorials:-Working with Power MILL "PART V" Toolpath Leads and Links

Sourbh
in Design & CAD
1 1 Intermediate
Links To provide for more efficient movement of the tool across the component the link moves that connect adjacent tool tracks can be defined in several different ways. Short/Long Threshold - This defines the distance limit up to which the Short - Links apply. Any move from the end of a tool track to the start of the next, which exceeds this distance is defined as a Long - Link move. For Short links the available options include Safe Z, Incremental, Skim, On Surface, Stepdown, Straight, and Circular Arc. For Long links the available options include Safe Z, Incremental, and Skim. Safe links apply only at the start and end of a toolpath the available options being Safe Z, Incremental, and Skim. For applications where a machine control system will permit arc fitting of rapid moves the Arc Fit Rapid Moves box can be ticked along with a suitable Radius based on the active tool diameter TDU (Of particular benefit to High Speed Machining). •Activate the toolpath 1_1 created earlier in the Leads section. •Set the Leads In and Out to None, if not already set. Press Apply.
Powermill paths sourbh powermill lead links tool

Tutorial: How to convert spline into a lines and arcs?

ady
in Design & CAD
1 0 Beginner
Another option but in this case I will convert randomly shape splines
Mastercam cadcam mastercam

IRONCAD Training 01-04 | Drag & Drop Modeling

Emil.Rindell
in Modeling
1 0 Beginner
Four videos that describes the Drag & Drop Modeling basics in IRONCAD.
IronCAD training triball easy cad user friendly beginner 3d cad ironcad

Tutorial MasteCam 2018 Part 1

Eko Sungkono
in Drafting
1 0 Beginner
Cara Membuat Design Gambar 2D
Mastercam

IronCAD - Linked Cross Sections

Nick
in Modeling
0 0 Intermediate
Create independent parts all driven by the one linked cross section
IronCAD section cross linked ironcad structural

how to reduce time involve in plunge in power mill

Sourbh
in Design & CAD
0 0 Beginner
There it is, but I need the solid model to Tell you detail process of Reducing the plunge milling.
Powermill

IronCAD - Multifeature part from one Cross Section

Nick
in Modeling
0 0 Intermediate
Create a pipe section with flanges at each end, using one circle to drive the bore diameter with flange OD offset from this.
IronCAD mechanical section cross pipe ironcad

Tutorials:-Working with Power MILL "PART III" 3D Area Clearance.

Sourbh
in Design & CAD
0 0 Beginner
Hi Guys, Am back with new Tutorials for CAM work in power mill. In this part you will Learn the Different Strategies for Material Removal/3d Area Clearance. Thanks and Enjoy...!!
Powermill engineering mill 3d area power cam educational tutorials clearance sourbh

Tutorial: How to create a helix along a 3D curve

Yaroslav
in Design & CAD
0 0 Beginner
Look the video. Important moments: - The orientation of cross section - Twist profile angle must be more then 360 Angel: 360*15 = 5400, Where 15 - number of coils Result file: http://grabcad.com/library/tutorial-how-to-create-a-helix-along-a-3d-curve-1
IronCAD 3d ironcad curve helix cord tipsntricks

Requested:-NC Program generation Problem- PP Error

Sourbh
in Design & CAD
0 0 Intermediate
This problem Generally occurs due to missing Duct processor Configuration, Duct Post or processor is generally used for offline program generation for specific CNC Machine. while post processor is for Direct NC program generation when the machine is connected to System.
Powermill cnc engineering cam sourbh aarti

Tutorial MasterCAM Sprocket 35 X 0.5

Muhamad Zen
in Modeling
0 1 Intermediate
Tutorial MasterCAM Sprocket 35 X 0.5
Mastercam mastercam sprocket muhamad_zen12 zen muhamad

Tutorial: How to convert spline into a lines and arcs?

ady
in Design & CAD
0 0 Beginner
For Circle spline.
Mastercam cadcam mastercam
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.