How to model two flute twist drill in SolidWorks?
Here is the way.
-
Step 1:
Start SolidWorks in Part mode.
-
Step 2:
Front Plane>>Sketch and draw a circle.
-
Step 3:
Extrude it.
-
Step 4:
Select the front face of the cylinder>>sketch.
-
Step 5:
Make two circles.
-
Step 6:
Extrude cut it.
-
Step 7:
Right Plane>>Sketch.
-
Step 8:
Make a profile like this one.
-
Step 9:
Revolve cut it.
-
Step 10:
Insert>>feature>>flex.
-
Step 11:
Select the body as the flex input. Change the type to twisting and enter an angle value of 300 degree or something like that.
-
Step 12:
Click OK and we have the drill bit.