Tutorial For Base and Seat Connector

Vegantra Amayko Siaga

18 Apr, 2022 01:52 PM

This is a step-by-step tutorial for making Base and Seat Connector. This design is made for Visualization and Modelling class.

Vegantra Amayko Siaga
2106658811

1. Step 1: Make a Circle

   First we make a circle in 2D Sketch with diamater of 10mm

   

   
   

   
   

2. Step 2: Extrude The Circle

   Next we extrude the circle with length of 50mm

   

   
   

   
   

3. Step 3: Make a Half Circle Sketch in The Top Surface

   Go to 2D Sketch again in the top surface of the cylinder and make a half circle of diameter of 20mm with arc and line.

   

4. Step 4: Revolve The 2D Sketch

   Next revolve that 2D Sketch and change the angle A to 180 Degrees

   

   
   

   
   

   
   

   
   

5. Step 5: Make a Rectangle

   Next the insert a plane above the half ball and start 2D Sketch of rectangle with 22,04 mm length and 4 mm witdh

   

   
   

6. Step 6: Extrude The Rectangle

   Next we Extrude the rectangle by 5,8 mm downward and select Cut in the Output option

   

   So, the model will look like this :

   

   And that's all the tutorial for Base and Seat Connector model. I hope this tutorial can be helpful. Thankyou.

   Vegantra Amayko Siaga