Tutorial: how to model a propelling pencil (2)
part 1
-
Step 1:
open a sketch on the shown place
-
Step 2:
use convert entities command and select the shown edges ( light blue ones )
-
Step 3:
use trim command
-
Step 4:
extrude it 1mm
-
Step 5:
open a sketch on this surface
-
Step 6:
draw a centerline and two lines
-
Step 7:
use convert entities command. select the black edges
-
Step 8:
use trim command..
-
Step 9:
cut the body 11mm
Next: http://grabcad.com/questions/tutorial-how-to-model-a-propelling-pencil-3