Tutorial - Vent feature in SolidWorks?

Here is the Tutorial.

  1. Step 1:

    Start SolidWorks and open the attached file.

  2. Step 2:

    Right click and select the fastening feature toolbar.

  3. Step 3:

    Select the top face and then sketch.

  4. Step 4:

    Draw a circle which will be the vent.

  5. Step 5:

    Select the vent in fastening feature toolbar.

  6. Step 6:

    Select the sketch and keep the default settings.

  7. Step 7:

    Click OK and the vent is generated.