Tutorials

  • IronCAD ×
  • SolidFace ×

Convert STEP/IGES files to STL on Mac

Robert Riegel
in Design & CAD
3 1 Intermediate
We’ve added a translator on Workbench that allows users to download a CAD file in STEP, IGES and STL formats, regardless of the format it was uploaded in. This makes it easy to share models with partners who don’t use the same CAD system you do. With just one click your supplier can download any of the neutral formats based on the original file you uploaded.
SolidFace step iges stl conversion

IronCAD - Top 10 Tips

Nick
in Modeling
3 5 Expert
Ten top tips for IronCAD
IronCAD hints tips ironcad

IronCAD - Using the Co-ordinate system to create a section

Nick
in Modeling
2 0 Intermediate
Use the Co-Ordinate systems to create a section plane. This is a handy alternative the section tool, as it does not cut the solid model.
IronCAD section cross

How to create a perforated sheet metal

Bob Heijningen
in Design & CAD
1 1 Intermediate
could be that you want to use rectangular patern. by creating one hole and copying it over the surface of the sheet. i actually never use sheet metal parts but here it goes.
IronCAD perforations

IRONCAD Training 01-04 | Drag & Drop Modeling

Emil.Rindell
in Modeling
1 0 Beginner
Four videos that describes the Drag & Drop Modeling basics in IRONCAD.
IronCAD training triball easy cad user friendly beginner 3d cad ironcad

IronCAD - Linked Cross Sections

Nick
in Modeling
0 0 Intermediate
Create independent parts all driven by the one linked cross section
IronCAD section cross linked ironcad structural

IronCAD - Multifeature part from one Cross Section

Nick
in Modeling
0 0 Intermediate
Create a pipe section with flanges at each end, using one circle to drive the bore diameter with flange OD offset from this.
IronCAD mechanical section cross pipe ironcad

Exercise 7 || 90 Degree PVC Equal Tee

Arvind Kumar
in Modeling
0 0 Beginner
Designing 90 Degree PVC Equal Tee using solidwork. A pipe tee is used for distributing or collecting the fluid from the run pipe. It is a short piece of pipe with a 90-degree branch at the center. Two types of Tee are used in piping: Equal / Straight Tee and Reducing / Unequal Tee.
SolidFace designing solidwork 90 degree equal tee equal tee

Tutorial: How to create a helix along a 3D curve

Yaroslav
in Design & CAD
0 0 Beginner
Look the video. Important moments: - The orientation of cross section - Twist profile angle must be more then 360 Angel: 360*15 = 5400, Where 15 - number of coils Result file: http://grabcad.com/library/tutorial-how-to-create-a-helix-along-a-3d-curve-1
IronCAD 3d ironcad curve helix cord tipsntricks

Tutorial title: SolidFace Professional Training Tutorials #02

SolidFace Technology
in Design & CAD
0 0 Beginner
Welcome to the SolidFace Professional Training! Moving on at our lessons in 2D CAD, we'll get more profound on the commands: Rectangle, Relative Point, Circle, Multiple Lines, Osnap, Centerline, Dimensions, Dimensions Edition. Bem-Vindos ao Treinamento da SolidFace Profissional! Dando continuidade as nossas lições no CAD 2D, os features serão: Rectangle, Relative Point, Circle, Multiple Lines, Osnap, Centerline, Dimensions, Dimensions Edition.
SolidFace drawing engineering software 2d cad 3d tutorial solidface

SolidFace Professional Training Tutorials #01

SolidFace Technology
in Design & CAD
0 0 Beginner
Welcome to the SolidFace Professional Training! This video is an introduction to the SolidFace interface when we'll see some essential functions on the CAD 2D. We'll see the features Line, Multiple Lines, Linear Dimensions, Centerline, and the differences between Parametric and Non-Parametric Dimensions. Bem-Vindos ao Treinamento da SolidFace Profissional! Esse vídeo é uma introdução da interface do SolidFace, onde nós vamos ver algumas funções básicas na parte de CAD 2D, vamos ver os features Line, Multiple Lines, Linear Dimensions, Centerline, e as diferenças entre cotas paramétricas e não paramétricas.
SolidFace engineering tutorial 3d cad 2d software drawing solidface
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.