Tutorials

  • Modeling ×
  • 3D Printing ×
  • AutoCAD Electrical ×
  • Autodesk 3ds Max ×
  • SOLIDWORKS ×

How To Model Complex Sheet Metal Parts in SOLIDWORKS

Russell Everard
in Modeling
53 8 Beginner
A step-by-step guide on how to create the shade holder part in the lamp model shown keeping cut outs in curved surfaces straight and true for a genuine flat pattern.
SOLIDWORKS surface curved sheetmetal solidworks

How to Complete Your CAD Homework

FredSWUG
in Modeling
51 9 Beginner
Models like this are common homework assignments for CAD students. Let's learn some skills to convert an isometric drawing into a 3D model. SOLIDWORKS is used, but these skills apply to any 3D CAD program.
SOLIDWORKS drafting 2d drawing model lesson help homework solidworks

How to design a Steering Knuckle (Request)

Yahya T Khedr
in Modeling
41 6 Beginner
==Request Tutorial== I've spent 3+ hours working on this tutorial just to show you how to design this model in SolidWorks 2016: https://grabcad.com/library/steering-knuckle-2d-to-3d-request-1 Note: The Unit system we'll use is mm.
SOLIDWORKS car knuckle steering request modeling solidworks

SolidWorks Best Practice Tips 01

Edgar Gidoni
in Modeling
38 9 Beginner
This is a collection of "best practices" and "tips" when using SolidWorks. We have compiled them over time. Not all of them are of our authorship, as more experienced users have made huge contributions on this subject. We hope you find this series useful. From time to time we will be posting more tips and advice for a more fruitful and professional use of SolidWorks. Stay tuned!
SOLIDWORKS edgargidoni tecnicursos swtutorials swtutorial swhowto solidworkstips swbestpractice

How to model a Bearing Support Lug in SolidWorks

Jack K
in Modeling
35 2 Beginner
Denisa Maria asked for help with modeling this part. Looked like an easy part, until I noticed the rounded perimeter (R100). Here's the steps I used to make it with SolidWorks.
SOLIDWORKS solidworks

How to create a Spring / Spiral using Solidworks

Sérgio CAD CAM
in Modeling
33 2 Beginner
How to create a Spring / Spiral (mola) using the software SolidWorks.
SOLIDWORKS spring suspension suspensao mola spiral

Gear design & drawing in SolidWorks

Nastja Irgolic
in Modeling
31 10 Beginner
In this tutorial i design a simple Gear. Just the basics. I hope it is ok. If you have any questions feel free to ask.
SOLIDWORKS gear solidworks beginners

Some Tips for Dealing With Splines

FredSWUG
in Modeling
31 5 Beginner
A lot of new SOLIDWORKS users are creating a computer mouse based off of some videos on Youtube. This is great, welcome to SOLIDWORKS. I wish there were a Youtube to learn from when I started! This is one example of the mouse, but there are dozens of others: https://grabcad.com/library/mouse-199 The tutorial is here: https://www.youtube.com/watch?v=HlTXEHjqWRI like many, it lacks audio. I truly appreciate the time and effort that goes into tutorials, so this is not to bash or complain. Follow along with the video, and you will learn. I just want you to see that there are a few issues which can occur. This problem arises around the five minute mark.
SOLIDWORKS tutorial mouse spline solidworks

FREE Solidworks Full Course | Beginner to Advance FREE

Amit Mourya
in Modeling
29 2 Beginner
Our Facebook Page : https://www.facebook.com/EngineeringExplanation Our website: www.engineerknow.com udemy course link : https://www.udemy.com/course/solidworks-animation-and-motion-analysis/?referralCode=8F40E7F83856CFF0C5FE [if you need discount coupon message me on my facebook page] Time Stamp Note: if you find something is missing then they are covered in Project 00:00 Introduction 00:43 User Interface 02:13 Sketch Basics 03:42 Hide and show relations/constraints 04:30 Under defined, Fully defined , Overdefined sketch 07:49 Convert line into a construction line 08:37 Types of the rectangle and their use 10:57 circle and three-point circle 11:20 Arc 12:25 Fillet 12:56 Chamfer 14:20 Text 15:30 Trim 14:45 Extent Entities 16:20 Offset entities 18:32 Mirror 20:22 Linear Sketch Pattern 21:50 Circular Pattern 24:25 Move entities 25:00 Rotate Entities 25:26 Copy Entities 26:06 Scale Entities 27:03 Stretch Entities 28:00 Convert Underdefine sketch into fully define sketch by one click 28:35 Add Relatio
SOLIDWORKS project training best online courses free full beginners course solidworks

Solid works Beginner Course

Usman Kamal
in Modeling
29 0 Beginner
Engineering Services All About Engineering Software's . SolidWorks Beginning Start up Tutorials. In these tutorials you'll learn basic commands and via simple video demonstration.
SOLIDWORKS modeling 3d solidworks beginners tutorial

V12 Car Engine by Solidworks

Mr Hieu Phuong
in Modeling
29 0 Beginner
V12 Car Engine by Solidworks
SOLIDWORKS solidwroks tutorial hp solidworks tutorial solidworks

[VIDEO]Volvo Excavator EC650

Mr Hieu Phuong
in Modeling
27 3 Beginner
Volvo Excavator EC650
SOLIDWORKS

How to make a thin-walled part in SolidWorks

Jack K
in Modeling
26 6 Beginner
Step-by-step instructions for a simple part in SolidWorks. prepared in response to a request for help from Ahmed Ahmed. The order of features is very important for this model, so follow the steps exactly as written.
SOLIDWORKS

Drawing Franky from Woody Woodpecker

Sérgio CAD CAM
in Modeling
25 1 Beginner
Drawing FRANKY PUXA FRANGOS FROM woody woodpecker credits model sheet found in https://cdna.artstation.com/p/assets/images/images/030/009/468/large/eduardo-ribeiro-wireframe.jpg?1599316654 3d model available to download in Grabcad: https://grabcad.com/library/frank-puxa-penas-sergio-cad-cam-1
SOLIDWORKS steps tutorial solidworks ciborgue android robotic robot

TIRE WITH TEXTURE

Michel Man
in Modeling
26 2 Beginner
Apply tread texture correctly to a tire
SOLIDWORKS texture tread tire wheel texturing automotive
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.