Tutorials

Robotic Tank Tread Assembly- Fusion 360 Tutorial (Tracked Robot Part 2)

10 3 Beginner
#Fusion360 #Fusion360Tutorial #AutodeskFusion360 Buy this chain: https://amzn.to/3f2FZEl In this series, we will design and develop a tracked, tank-like mobile robot optimized for use on sand and in desert environments. The modeling of the treads, custom sprocket, idler rollers and 3D printed suspension system will be shown in great detail. We will first create the chain links themselves and the tread pieces, then pattern them along the shape of the loop. Once we finish this, we will create the custom sprocket and motor connection followed by the idler spindle and finally the suspension system. In the end, we can mirror our entire assembly to the other side to create the right side tread. Working on only one side at a time makes it easier on our computers and allows us to work faster with less lag-time.

Robotic Suspension System 4- Fusion 360 Tutorial (Tracked Robot Part 9)

6 0 Beginner
#Fusion360 #Fusion360Tutorial #AutodeskFusion360 Robotic Suspension System 4- Fusion 360 Tutorial (Tracked Robot Part 9)

How to Package Electronic Components in Fusion 360: Tutorial

5 1 Beginner
#Fusion360 #Fusion360Tutorial #AutodeskFusion360

How to Use Threaded Inserts in Your 3D Printed Parts- Example with DC Motor in Fusion 360

3 2 Beginner
This tutorial illustrates the modeling and use of threaded bras inserts in 3d printed parts and set screws to clamp down on DC motor flats.

How to Make a DC Motor & Sprocket Assembly: Fusion 360 Robotics Tutorial for Beginners (Robot Part 3)

2 0 Beginner
#Fusion360 #Fusion360Tutorial #AutodeskFusion360 In this series, we will design and develop a tracked, tank-like mobile robot optimized for use on sand and in desert environments. The modeling of the treads, custom sprocket, idler rollers and 3D printed suspension system will be shown in great detail. We will first create the chain links themselves and the tread pieces, then pattern them along the shape of the loop. Once we finish this, we will create the custom sprocket and motor connection followed by the idler spindle and finally the suspension system. In the end, we can mirror our entire assembly to the other side to create the right side tread. Working on only one side at a time makes it easier on our computers and allows us to work faster with less lag-time. Buy this chain for projects: https://amzn.to/3f2FZEl

A2plus in FreeCAD | Constraints

2 0 Beginner
A2plus in FreeCAD| Constraint Constraint - Part2 In this Tutorial you can learn Point on Line Point on Plane Sphere on Sphere Circular Edge on Circular Edge Axis Coincident Axis Parallel Axis on Plane parallel Axis on Plane normal FreeCAD is a free and open-source general-purpose parametric 3D computer-aided design modeler and a building information modeling software with finite element method support. Downloads FreeCAD software from this https://www.freecadweb.org/downloads.php