Tutorials

How to FDM Print for Part Sliding Clearance

13 4 Intermediate
If you are 3D printing parts that have to fit/slide together after printing, you will need to put some sort of clearance between those parts in your CAD system. A good starting place is a clearance 2x the layer height you are going to print at, but you should make a few smaller test prints at different clearances to see if the 2x layer height rule holds for your particular situation and orientation. Have fun and happy printing!

Scooby_doo car

9 0 Beginner
Estaffette

Stacking Your Parts in Z for FDM

2 0 Intermediate
Have long thin flat parts you’ve always wanted to print right on top of each other in FDM but the slicer never allowed you to? Learn how to use this exclusive new feature in GrabCAD Print Pro!

fluent simulation

2 0 Beginner
visit site: https://alfaproject.ir/fluent-proje/

INVERTER

1 0 Beginner
INVERTER

GrabCAD Print Pro™ - Per Part Groups For Service Bureaus

1 0 Expert
The premium version of GrabCAD Print™, GrabCAD Print Pro™ is now available! This version includes new & enhanced features. This tutorial will explain per part estimation & assembly grouping!

Elmer's Engine Animation

0 0 Beginner
https://youtu.be/80nUHxN1hVs

blog

0 0 Beginner
h asdj ajdalj asdjaljd ahdahdadn akjdhakhjd f ashdaha

JP_005_GrabCAD Print: 部品摺動部の隙間をFDM造形する方法

0 0 Intermediate
造形後にはめ合わせるまたは摺動(スライド)させる必要がある部品を3D造形する場合、CADシステムで該当する部品の間にある程度の隙間を設ける必要があります。目安として、造形する際の積層ピッチの2倍の隙間から始めるとよいでしょう。ただし、小さいサイズで何度かテスト造形を行い、積層ピッチの2倍の法則が特定の状況や向きに当てはまるかを確認することをお勧めします。それでは3Dプリンタで楽しくモノづくりをしていきましょう!