Tutorials

Filling basic 6-sided holes in Rhino

7 1 Beginner
This tutorial shows how to fill a 6-sided hole surrounded by simple planar surface transitions in Rhino.

Video Tutorials from Rhino 3D Tutorials

5 0 Beginner
A series of little tutorials made available on my Youtube channel. For more detailed Rhino 3D tutorials here's the link https://rhino-3d-classes-from-beginner-to-advanced-lev.teachable.com/

Industrial shelter 12x4 meters (Rhinoceros)

2 0 Beginner
Industrial shelter 12 meter wide, 4 meters long and 2,97 meters total high (2,53 meters usable high from the front, and 2,88 meters from the back). Area is 48 m2. Uses 5 mm thick laser cut plates and the following tubes sizes (all in millimeters): 100x100x2 mm 80x40x2 mm Includes a link to YouTube with a video tutorial showing the design process from start to finish with Rhinoceros: https://youtu.be/6KgcZnYgpok

How do I change the scale in a DXF when I import it into Mastercam?

2 1 Beginner
Here is what I did. Sorry about my bad english.

GOOD JOB

1 0 Beginner
HI

Blend surface - Advanced Planar sections (tutorial 1)

1 0 Beginner
Blend surface with advanced "Planar sections" option

Zig-zag stairs

1 0 Beginner
Simple modeling tutorial for creating modern zig-zag stairs with Rhino.

Filling basic 6-sided holes in Rhino (ver. 3)

1 0 Beginner
This tutorial shows how to fill a 6-sided hole surrounded by simple planar surface transitions in Rhino.

Loft magic

1 0 Beginner
When it comes to organic NURBS shapes like that, nothing can beat the quality, simplicity and History-enabled modification that Loft with the “Loose” option provides. A good practice is to use profile curves with the same degree and amount of control points. I started by creating the round base by using the Circle command with the “Deformable” option and 8 control points. Then, I simply copied it a few times and modified each one individually by moving its control points in the desired location. I also used Scale 3D and Scale 1D to adjust the overall size of each profile curve. As I moved or modified each intermediate curve, the History-enabled Loft surface updated in real-time, thus it let me decide what changes I needed to make to achieve the desired shape. NOTE: In this example initially I used the “Normal” option of Loft, which is not a good way to do the shape. The video capture was interrupted for some reason and stopped far earlier, so you will not see how I then deleted the loft surface and create

Editable tween curve on surface or polysurface

1 0 Beginner
History in Rhino 7 must be turned on, in order for the modifications on the input surfaces to affect the output tween surface and its corresponding curve intersection. The latter could be further simplified via the "! _RemoveMultiKnot" command, though that will destroy the history and also may cause the curve to no longer sit perfectly accurate on the surface/polysurface.

Blend surface - Advanced Planar sections (tutorial 2)

1 0 Beginner
Blend surface with advanced "Planar sections" option

Loft to simulate a full round fillet between 3 surfaces

1 0 Beginner
In cases where 3 surfaces meet together and the goal is to create a full round fillet in-between, the top surface could be used to extract an isocurve that’s then used as a middle profile for a “Loft surface”. The two main vertical surfaces are shortened by the amount of approximate radius (in this example, the radius is 5 mm, because the two main surfaces are 10 mm far from each other) and set to tangent start and end for the loft operation. That would maintain the desired top limit for the rounded surface, though it will not produce a true radius fillet.

Rhinoceros tutorials Building part 2 Parametric modeling 3d Rhinoceros Grasshopper

0 0 Beginner
Tutorial edificio parte 2 . Ésto es un tutorial para diseñar a partir de modelos 3d realizados en Rhinoceros y programación visual en Grasshopper. (English) This is a tutorial to design from three-dimensional models made in Rhinoceros and visual programming made in Grasshopper.We include architecture, design, three-dimensional models and programming with the support of software technology regards! subscribe ! MATGICAL@blogspot.com f DigitalMagical magicaldigital Ig

Super hack to create hollow objects for 3d printing in Rhino

0 0 Beginner
This is a quite easy “hack” how to create hollow objects that are usually not allowed by other CAD programs. Great for 3d printing. Simply connect the outer and inner objects via some random pipe or box, then join everything and untrim the hole that connects them with the ! _Untrim tool. You will notice that the two original separate objects now appear as a single object instead, despite the lack of an actual connection in-between. An alternative way is to select both objects and use the following commands: NonManifoldMerge, then CreateRegions, then delete the region you do not want, such like the core inside the sphere in this particular example.

Full round fillet between 3 surfaces

0 0 Beginner
This tutorial shows how to use a tangent circle to 3 surfaces to build a full round fillet in-between.