Tutorials

SpaceClaim basic tutorial - spring

9 0 Beginner
How to make spring in SpaceClame

Filling basic 6-sided holes in Rhino

8 1 Beginner
This tutorial shows how to fill a 6-sided hole surrounded by simple planar surface transitions in Rhino.

Video Tutorials from Rhino 3D Tutorials

6 0 Beginner
A series of little tutorials made available on my Youtube channel. For more detailed Rhino 3D tutorials here's the link https://rhino-3d-classes-from-beginner-to-advanced-lev.teachable.com/

Tutorial: How to quickly add motion dynamics to any CAD model in SpaceClaim

5 0 Beginner
Tutorial below

How to model the StMary30st in Rhinoceros3D and show design intent.

4 1 Beginner
Here my explanation on how to do

Industrial shelter 12x4 meters (Rhinoceros)

2 0 Beginner
Industrial shelter 12 meter wide, 4 meters long and 2,97 meters total high (2,53 meters usable high from the front, and 2,88 meters from the back). Area is 48 m2. Uses 5 mm thick laser cut plates and the following tubes sizes (all in millimeters): 100x100x2 mm 80x40x2 mm Includes a link to YouTube with a video tutorial showing the design process from start to finish with Rhinoceros: https://youtu.be/6KgcZnYgpok

SpaceClaim basic tutorial - variable spring

2 0 Beginner
SpaceClame basic tutorial - how to make variable spring

Zig-zag stairs

2 0 Beginner
Simple modeling tutorial for creating modern zig-zag stairs with Rhino.

How do I change the scale in a DXF when I import it into Mastercam?

2 1 Beginner
Here is what I did. Sorry about my bad english.

Rhinoceros building tutorial_Desing Architecture Matias A Casciotta Gracia_Magical estudio digital3d

2 0 Beginner
Hello designers!! This is a tutorial to design from three-dimensional models made in Rhinoceros and visual programming made in Grashopper We include architecture, design, three-dimensional models and programming with the support of software technology. I hope it works! (Español) Hola diseñadores!! Ésto es un tutorial para diseñar a partir de modelos 3d realizados en Rhinoceros y programación visual en Grasshopper. Vemos Diseño,Arquitectura,Modelos 3d y Programación, con el apoyo de tecnología de software. Espero les sirva!

SpaceClaim basic tutorial - taper spring

2 0 Beginner
SpaceClame basic tutorial - how to make taper spring

GOOD JOB

1 0 Beginner
HI

Clean, easy to edit shape with Loft and Blend surface

1 0 Beginner
Clean, easy to edit shape with Loft and Blend surface

Converting a metal tube with 3 mm fillets to an aluminum extrusion

1 0 Beginner
Converting a metal tube with 3 mm fillets to an aluminum extrusion

How to make twisted bar

1 0 Beginner
It is not obvious to create twisted bar in SpaceClaim, e.g. for welded grating. I hope this lifehack will help You to make it in different cad programs. Как скрутить пруток в SpaceClaim, например для решетчатого настила. Подозреваю, что этот способ можно применять и в других программах.