Tutorials

  • Design & CAD ×
  • Assemblies ×
  • Autodesk Maya ×
  • Autodesk 123D ×
  • Mastercam ×

Building Mini Morris Cooper

PabloModelkits
in Modeling
7 3 Expert
Insane detail level modeling this Mini Morris Cooper. Leave you comments and questions, I will be happy to answer.
Autodesk Maya montecarlo rally iconic car classic cooper morris mini automotive

Mastercam 2021 (CAD+CAM)

MANOJ VISHWAKARMA
in Modeling
6 2 Intermediate
Mastercam 2021 3D Modeling tutorial
Mastercam cnc cam cad mastercam

Junk sail boat | 3d modeling timelapse

PabloModelkits
in Modeling
3 0 Expert
Time lapse 3d modeling of a Junk Sail Boat. Feel free to leave you comments!
Autodesk Maya maya autodesk modeling 3d boat sail junk

Volkswagen Van Type 23 | Time lapse

PabloModelkits
in Modeling
2 0 Expert
Here is a van that reminds to peace the Volkswagen Type 23.
Autodesk Maya lapse time van 23 type volkswagen

KTM (Streetfighter )

I'M A DESIGNER
in Modeling
2 0 Expert
Tuto n°61 - KTM (Streetfighter ) sur Autodesk Maya https://www.youtube.com/watch?v=8vGN83WWMIc
Autodesk Maya

Bristol 450 2L. Time lapse modeling

PabloModelkits
in Modeling
2 0 Expert
Rare care that participate in Le Mans. Team: Bristol Aeroplane Co. Le Mans 24 Hours (June 11 - 12) Drivers: Peter S. Wilson & Jim Mayers
Autodesk Maya maya autodesk modeling mans le 450 car bristol

How do I change the scale in a DXF when I import it into Mastercam?

ady
in Design & CAD
2 1 Beginner
Here is what I did. Sorry about my bad english.
Mastercam neck stratocaster dxf

3D Modeling of a Braitenberg Vehicle in 4 Steps using Autodesk 123D Design

Yoana Ivanova
in Modeling
2 0 Intermediate
This tutorial is suitable for designers who have a basic knowledge of using the open source product Autodesk 123D Design. The steps to build a Breitenberg vehicle are as follows: 1. Modeling a wheel: a cylinder with a diameter of 2 cm and a height of 0.5 cm is placed in the workspace. Drill a hole in it by drawing a circle with a diameter of 0.3 cm and extruding - 0.5 cm with the Extrude tool. We soften the edges of the cylinder with Fillet Radius: 0.5. 2. Clone the wheel: rotate the resulting wheel 90° along the Z axis and copy it with Ctrl+C and Ctrl+V. 3. Modeling the vehicle body: regarding the design of the vehicle body, there are various options. In this case the author models a classic vehicle, which is most often shown in the bibliographic sources. After drawing and extruding a surface with the desired shape we apply Fillet with radius 35 on the back edge and with 30 on the front edge for a contemporary design (i could provide more images if it is needed). On the selected side edges we successively apply Fillet with a radius of 9. 4. Make a special place for the sensor: it is necessary to select the square plane that is located in the middle of the case and successively apply Sketch > Project, Sketch > Offset and Construct > Extrude with a negative value.
Autodesk 123D breitenberg vehicle

how to use rotation in axis like autocad in mastercam

Abdul Haseeb Malik
in Design & CAD
1 0 Intermediate
I never tried MasterCam... may be you will find your answer in this tutorial
Mastercam

Modeling Windmill time lapse

PabloModelkits
in BOM
1 0 Expert
Building a windmill with volumetric light in Autodesk Maya.
Autodesk Maya autodesk maya light volumetric windmill

How to Download & Install MasterCAM x9

The savvy engineer
in Modeling
1 0 Beginner
How to Download & Install MasterCAM x9
Mastercam mastercam

Tutorial: How to convert spline into a lines and arcs?

ady
in Design & CAD
1 0 Beginner
Another option but in this case I will convert randomly shape splines
Mastercam cadcam mastercam

Tutorial MasteCam 2018 Part 1

Eko Sungkono
in Drafting
1 0 Beginner
Cara Membuat Design Gambar 2D
Mastercam

Dodge Panel Van | Time lapse

PabloModelkits
in Modeling
0 0 Expert
Here a mafia car, the Dodge Panel Van 1935.
Autodesk Maya classic mafia van panel dodge

turn 2d cylinder balusters to 3d model maya

Abanob Anwar
in Modeling
0 0 Beginner
turn 2d cylinder balusters to 3d model maya
Autodesk Maya maya baluster cylinder
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.