Tutorials

How to FDM Print for Part Sliding Clearance

13 4 Intermediate
If you are 3D printing parts that have to fit/slide together after printing, you will need to put some sort of clearance between those parts in your CAD system. A good starting place is a clearance 2x the layer height you are going to print at, but you should make a few smaller test prints at different clearances to see if the 2x layer height rule holds for your particular situation and orientation. Have fun and happy printing!

Onshape Tutorial Exersice

11 0 Intermediate
Sometimes you will not have Solidworks or a similar program installed on your computer. And you may have to make a model immediately. In such situations, Onshape is great. The link to the modeling file from the sample technical drawing is given below. https://cad.onshape.com/documents/51b10db64d8c10d69e04f4da/w/b4cd4b090cea13100d679675/e/741f8ec43a660ff55252cd29

Matte or Glossy? Which Finish to Use for Your 3D Prints and When.

9 0 Beginner
Matte or Glossy? That is the question. PolyJet users often ask themselves whether they should print a part with a matte finish or a glossy finish. And not without reason. The type of finish can totally alter the look, feel, color, and even strength and durability of two otherwise identical parts. Each option has its own benefits and implications that need to be considered. In this tutorial we will give an overview of matte and glossy, compare the pros and cons of each, and offer examples that clearly show what each finish type has to contribute. Finally, we will wrap up with a quick breakdown of when to use what.

volleyball in Onshape

4 0 Intermediate
I wanted to get to know Onshape better and had a look at the split, transform and pattern command. I repeated this in SolidWorks and it is the same workflow.

Onshape for Absolute Beginners

3 0 Beginner
https://youtu.be/2utLjjkXpIg

How To Create Chess Queen

3 1 Beginner
Chess Queen on OnShape

Stacking Your Parts in Z for FDM

2 0 Intermediate
Have long thin flat parts you’ve always wanted to print right on top of each other in FDM but the slicer never allowed you to? Learn how to use this exclusive new feature in GrabCAD Print Pro!

Onshape Exercise 6

2 1 Beginner
Beginner's exercise videos in Onshape.

Exercise 4

2 1 Beginner
Beginner's exercise video in Onshape.

Onshape Exercise 5

2 1 Beginner
Beginner's exercise videos in Onshape.

Exercise 1

2 1 Beginner
Exercise videos in Onshape.

Exercise 2

2 1 Beginner
Beginner's exercise video in Onshape.

Exercise 3

1 1 Beginner
Beginner's exercise video in Onshape.

Wheatley core

1 0 Beginner
a tutorial on how i made a personality core

JP_011_GrabCAD Print: 「マットかグロス?」3D造形でどのような場合にどちらの仕上げを使用すればよいのか

1 0 Beginner
マット(艶消し)にするか、それともグロッシー(光沢)にするか、それが今回のテーマです。 PolyJetプリンタをお使いの皆さんは、部品をマット仕上げにすべきか、グロッシー仕上げにすべきかで悩むことがよくあります。 皆さんが頭を悩ませるのも無理ありません。それ以外の点はまったく同じの2個の部品でも、仕上げのタイプが異なると、見た目、感触、色、そして強度や耐久性までもががらりと変わってしまう可能性があるのです。どちらの仕上げにもそれぞれ、考慮すべき独自のメリットと影響があります。 このチュートリアルでは、マット仕上げとグロッシー仕上げの概要を説明し、それぞれの長所と短所を比較し、それぞれのタイプがどのような仕上がりにつながるのかを明確に示す例を紹介します。そして最後に、どのような場合にどちらの仕上げを使用すればよいのかを簡単に分類してまとめとします。