Tutorials

  • Design & CAD ×
  • CFD ×
  • Snagit ×
  • Pro/Engineer Wildfire ×
  • TurboCAD ×
  • GrabCAD Print ×

How to FDM Print for Part Sliding Clearance

GrabCAD Tutorials
in Assemblies
13 4 Intermediate
If you are 3D printing parts that have to fit/slide together after printing, you will need to put some sort of clearance between those parts in your CAD system. A good starting place is a clearance 2x the layer height you are going to print at, but you should make a few smaller test prints at different clearances to see if the 2x layer height rule holds for your particular situation and orientation. Have fun and happy printing!
GrabCAD Print sliding clearance printing 3d fdm

can you give drawing models with dimensions to practice?

vigneshwaran I
in Design & CAD
13 0 Intermediate
try
Pro/Engineer Wildfire

can you give drawing models with dimensions to practice?

khawer mahmood
in Design & CAD
7 0 Intermediate
practice models
Pro/Engineer Wildfire

Tutorial: Welding In Proe

Milan Ilić
in Design & CAD
4 0 Intermediate
Welding in Pro E (Creo 2)
Pro/Engineer Wildfire tutorial enginner pro parametric creo welding

Stacking Your Parts in Z for FDM

Stratasys
in Assemblies
2 0 Intermediate
Have long thin flat parts you’ve always wanted to print right on top of each other in FDM but the slicer never allowed you to? Learn how to use this exclusive new feature in GrabCAD Print Pro!
GrabCAD Print fdm stacking stratasys 3d printing software grabcad print pro

How to analyse Pro Engineer component in Ansys 10.0 welding property?

harikrushna dodiya
in Design & CAD
2 0 Intermediate
u can weld through following step in workbench There are one "WELD" option in geometry. there u can create weld
Pro/Engineer Wildfire property weld

Smoking Shelter

David Crosby
in Assemblies
1 0 Intermediate
Building the smoking shelter. I have full workshop drawings for making all of the parts. Contact me at gbm60@hotmail.com if you are interested in making the first real one.
Pro/Engineer Wildfire shelter smoking

How to Copy-Paste parameters from one part to another in Pro-E?

martin Cronje
in Design & CAD
1 0 Intermediate
It doesn't the parameters if there is a parameter which has a restriction. I've deselected those parameters and copy and paste the rest into the part. You will have to create the restricted parameters yourself.
Pro/Engineer Wildfire values paste parameters copy proe pro pro-e

how to do wire rope in pro e

Tushar Wandhare
in Design & CAD
1 1 Intermediate
wire rope can be design by using WRAP command.
Pro/Engineer Wildfire

solidworks 2010 to proe wildfire5

Srijith.M.R.Nair
in Design & CAD
0 0 Intermediate
First you have to save the part ans the assembly files in either step or iges format . This can be done by using the save as option and selecting the file type. then you can open that part or assembly in most of the modelling softwares such as pro e creo nx etc
Pro/Engineer Wildfire

how to edit extrude without deleting pattern

Huy Pham
in Design & CAD
0 0 Intermediate
I can help you
Pro/Engineer Wildfire

How to make belt mechanism in pro e wildfire 4

Abdul Haseeb Malik
in Design & CAD
0 0 Intermediate
here is the tutorial link Asif.... search on GrabCAD or try on google.....
Pro/Engineer Wildfire

ProE Tutorial: How to create parameter for Pattern feature / sampling

Vladimir Palffy
in Design & CAD
0 0 Intermediate
Step for reproduce: How to create parameter for Pattern feature / sampling
Pro/Engineer Wildfire creo pattern proe sampling

JP_005_GrabCAD Print: 部品摺動部の隙間をＦＤＭ造形する方法

Stratasys Japan
in Assemblies
0 0 Intermediate
造形後にはめ合わせるまたは摺動（スライド）させる必要がある部品を3D造形する場合、CADシステムで該当する部品の間にある程度の隙間を設ける必要があります。目安として、造形する際の積層ピッチの2倍の隙間から始めるとよいでしょう。ただし、小さいサイズで何度かテスト造形を行い、積層ピッチの2倍の法則が特定の状況や向きに当てはまるかを確認することをお勧めします。それでは3Dプリンタで楽しくモノづくりをしていきましょう！
GrabCAD Print fdm 3d printing clearance sliding
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.