Tutorials

Mastercam 2021 (CAD+CAM)

6 2 Intermediate
Mastercam 2021 3D Modeling tutorial

Convert STEP/IGES files to STL on Mac

3 1 Intermediate
We’ve added a translator on Workbench that allows users to download a CAD file in STEP, IGES and STL formats, regardless of the format it was uploaded in. This makes it easy to share models with partners who don’t use the same CAD system you do. With just one click your supplier can download any of the neutral formats based on the original file you uploaded.

IronCAD - Top 10 Tips

3 5 Expert
Ten top tips for IronCAD

IronCAD - Using the Co-ordinate system to create a section

2 0 Intermediate
Use the Co-Ordinate systems to create a section plane. This is a handy alternative the section tool, as it does not cut the solid model.

How do I change the scale in a DXF when I import it into Mastercam?

2 1 Beginner
Here is what I did. Sorry about my bad english.

how to use rotation in axis like autocad in mastercam

1 0 Intermediate
I never tried MasterCam... may be you will find your answer in this tutorial

How to create a perforated sheet metal

1 1 Intermediate
could be that you want to use rectangular patern. by creating one hole and copying it over the surface of the sheet. i actually never use sheet metal parts but here it goes.

How to Download & Install MasterCAM x9

1 0 Beginner
How to Download & Install MasterCAM x9

Tutorial: How to convert spline into a lines and arcs?

1 0 Beginner
Another option but in this case I will convert randomly shape splines

IRONCAD Training 01-04 | Drag & Drop Modeling

1 0 Beginner
Four videos that describes the Drag & Drop Modeling basics in IRONCAD.

Tutorial MasteCam 2018 Part 1

1 0 Beginner
Cara Membuat Design Gambar 2D

IronCAD - Linked Cross Sections

0 0 Intermediate
Create independent parts all driven by the one linked cross section

IronCAD - Multifeature part from one Cross Section

0 0 Intermediate
Create a pipe section with flanges at each end, using one circle to drive the bore diameter with flange OD offset from this.

Exercise 7 || 90 Degree PVC Equal Tee

0 0 Beginner
Designing 90 Degree PVC Equal Tee using solidwork. A pipe tee is used for distributing or collecting the fluid from the run pipe. It is a short piece of pipe with a 90-degree branch at the center. Two types of Tee are used in piping: Equal / Straight Tee and Reducing / Unequal Tee.