Tutorials

Make a Motorcycle in TinkerCAD

3 0 Beginner
Design a motorcycle in TinkerCAD. Step by Step instructions that are written for middle school aged students. If you have dual screens, watch on one, complete on the other. Otherwise, watch a little, then do a little. If you make something awesome, share an image @HLModtech on Instagram, Facebook or Twitter.

scaling in Tinker CAD

3 1 Beginner
How to use TinkerCAD.

3D Modeling of a Braitenberg Vehicle in 4 Steps using Autodesk 123D Design

2 0 Intermediate
This tutorial is suitable for designers who have a basic knowledge of using the open source product Autodesk 123D Design. The steps to build a Breitenberg vehicle are as follows: 1. Modeling a wheel: a cylinder with a diameter of 2 cm and a height of 0.5 cm is placed in the workspace. Drill a hole in it by drawing a circle with a diameter of 0.3 cm and extruding - 0.5 cm with the Extrude tool. We soften the edges of the cylinder with Fillet Radius: 0.5. 2. Clone the wheel: rotate the resulting wheel 90° along the Z axis and copy it with Ctrl+C and Ctrl+V. 3. Modeling the vehicle body: regarding the design of the vehicle body, there are various options. In this case the author models a classic vehicle, which is most often shown in the bibliographic sources. After drawing and extruding a surface with the desired shape we apply Fillet with radius 35 on the back edge and with 30 on the front edge for a contemporary design (i could provide more images if it is needed). On the selected side edges we successively apply Fillet with a radius of 9. 4. Make a special place for the sensor: it is necessary to select the square plane that is located in the middle of the case and successively apply Sketch > Project, Sketch > Offset and Construct > Extrude with a negative value.

FREE - TINKERCAD - TUTORIAL

1 0 Beginner
Don't need to download any software, it is freely available online This tutorial will help to design 3D blocks very easily , just go through my video lectures on Tinkercad on my youtube channel

Autodesk TinkerCAD Basics

1 1 Expert
Hello my name is Vijay and I am a designer in TinkerCAD. This tutorial is to learn the basics of TinkerCAD from Noob to proffesional.You can also ask any questions regarding in the designing of TinkerCAD.