Tutorials

  • Design & CAD ×
  • Drafting ×
  • Theory ×
  • Autodesk 123D ×
  • Mastercam ×
  • PTC Creo Elements ×

How to Download & Install MasterCAM x9

The savvy engineer
in Modeling
1 0 Beginner
How to Download & Install MasterCAM x9
Mastercam mastercam

3D Modeling of a Braitenberg Vehicle in 4 Steps using Autodesk 123D Design

Yoana Ivanova
in Modeling
2 0 Intermediate
This tutorial is suitable for designers who have a basic knowledge of using the open source product Autodesk 123D Design. The steps to build a Breitenberg vehicle are as follows: 1. Modeling a wheel: a cylinder with a diameter of 2 cm and a height of 0.5 cm is placed in the workspace. Drill a hole in it by drawing a circle with a diameter of 0.3 cm and extruding - 0.5 cm with the Extrude tool. We soften the edges of the cylinder with Fillet Radius: 0.5. 2. Clone the wheel: rotate the resulting wheel 90° along the Z axis and copy it with Ctrl+C and Ctrl+V. 3. Modeling the vehicle body: regarding the design of the vehicle body, there are various options. In this case the author models a classic vehicle, which is most often shown in the bibliographic sources. After drawing and extruding a surface with the desired shape we apply Fillet with radius 35 on the back edge and with 30 on the front edge for a contemporary design (i could provide more images if it is needed). On the selected side edges we successively apply Fillet with a radius of 9. 4. Make a special place for the sensor: it is necessary to select the square plane that is located in the middle of the case and successively apply Sketch > Project, Sketch > Offset and Construct > Extrude with a negative value.
Autodesk 123D breitenberg vehicle

Tutorial MasteCam 2018 Part 1

Eko Sungkono
in Drafting
1 0 Beginner
Cara Membuat Design Gambar 2D
Mastercam

Mastercam 2021 (CAD+CAM)

MANOJ VISHWAKARMA
in Modeling
6 2 Intermediate
Mastercam 2021 3D Modeling tutorial
Mastercam cnc cam cad mastercam

Tutorial MasterCAM Sprocket 35 X 0.5

Muhamad Zen
in Modeling
0 1 Intermediate
Tutorial MasterCAM Sprocket 35 X 0.5
Mastercam mastercam sprocket muhamad_zen12 zen muhamad

how to perform analysis test on ansys software

harikrushna dodiya
in Design & CAD
12 1 Intermediate
This is modal analysis of impeller step
PTC Creo Elements

Maximum rotating angle of universal joint

764ce2aa
in Design & CAD
0 0 Intermediate
refer this http://www.sdp-si.com/D757/couplings3.htm
PTC Creo Elements

how to use rotation in axis like autocad in mastercam

Abdul Haseeb Malik
in Design & CAD
1 0 Intermediate
I never tried MasterCam... may be you will find your answer in this tutorial
Mastercam

Tutorial: How to add exploded view in drawing?

Milan Ilić
in Design & CAD
5 0 Intermediate
How to add exploded view in drawing?
PTC Creo Elements drawing exploded view creo pro-e

Tutorial on Modeling and Simulation of standard gear

Milan Ilić
in Design & CAD
6 1 Intermediate
Tutorial on Modeling and Simulation of standard gear...
PTC Creo Elements gear standard simulation tutorial engineer pro parametric creo

Tutorial: How to change the units from inch to mm in CREO?

Milan Ilić
in Design & CAD
2 0 Intermediate
ja sam u Creo Parametric 2.0 menjao ovako.. C:\Program Files\PTC\Creo 2.0\Common Files\M070\creo_standards\zatim pokrenuo configure i odabrao 5 (vidi sliku)
PTC Creo Elements inch mm change enginner pro parametric creo units

How do I change the scale in a DXF when I import it into Mastercam?

ady
in Design & CAD
2 1 Beginner
Here is what I did. Sorry about my bad english.
Mastercam neck stratocaster dxf

Spring Loaded Safety Valve Video Tutorials in Pro/Engineer

Sudhir Gill
in Design & CAD
0 0 Beginner
Spring Loaded Safety Valve Video Tutorials in Pro/Engineer
PTC Creo Elements valve safety spring video tutorial gill loaded

Soccer Ball Video Tutorial in Pro/Engineer

Sudhir Gill
in Design & CAD
0 0 Beginner
Soccer Ball Video Tutorial in Pro/Engineer
PTC Creo Elements video ball soccer engineer pro tutorial

How to add exploded view in drawing?

rakesh
in Design & CAD
1 0 Beginner
Here is Tutorial!!!!!!!!!
PTC Creo Elements drawing exploded view creo pro-e
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.