Tutorials

  • Design & CAD ×
  • Assemblies ×
  • Engineering Fundamentals ×
  • IronCAD ×
  • ZW3D ×
  • GrabCAD Print ×

How to FDM Print for Part Sliding Clearance

GrabCAD Tutorials
in Assemblies
13 4 Intermediate
If you are 3D printing parts that have to fit/slide together after printing, you will need to put some sort of clearance between those parts in your CAD system. A good starting place is a clearance 2x the layer height you are going to print at, but you should make a few smaller test prints at different clearances to see if the 2x layer height rule holds for your particular situation and orientation. Have fun and happy printing!
GrabCAD Print sliding clearance printing 3d fdm

ZW3D Tutorial | How to Design a Headlight Reflector

Iris Chan
in Modeling
3 0 Intermediate
The headlight reflector is an important part of the headlight, as it helps with light concentration and car distinction. In this tutorial, you will learn about the main structure of a headlight reflector and how to design it. If you find this tutorial helpful and interesting, please give it a like and share it with your friends.
ZW3D automotive modeling zw3d

IronCAD - Using the Co-ordinate system to create a section

Nick
in Modeling
2 0 Intermediate
Use the Co-Ordinate systems to create a section plane. This is a handy alternative the section tool, as it does not cut the solid model.
IronCAD section cross

Stacking Your Parts in Z for FDM

Stratasys
in Assemblies
2 0 Intermediate
Have long thin flat parts you’ve always wanted to print right on top of each other in FDM but the slicer never allowed you to? Learn how to use this exclusive new feature in GrabCAD Print Pro!
GrabCAD Print fdm stacking stratasys 3d printing software grabcad print pro

How to create a perforated sheet metal

Bob Heijningen
in Design & CAD
1 1 Intermediate
could be that you want to use rectangular patern. by creating one hole and copying it over the surface of the sheet. i actually never use sheet metal parts but here it goes.
IronCAD perforations

ZW3D Spoon Modeling

Muhamad Zen
in Modeling
1 1 Intermediate
ZW3D Spoon Modeling
ZW3D muhamad_zen12 zen muhamad zw3d

ZW3D Tutorial - Surface Modelling - Intermediate level - Exercise 9

CAD Thinkers
in Modeling
1 0 Intermediate
Elements used in all sketches are as follow: - Circle - Arc - Offset - Slot - Rectangle - Dimension - Constraints - Reference Elements used in 3D environment is as follow: - Datum Plane - Wireframe: Curve List - Wireframe: Combined Projection - Shape: Extrude/Remove - Shape: Revolve - Free Form: Curve Mesh (2x) - Wireframe: Project to Face - Shape: Mirror - Free Form: N-Sided - Shape: Shell - Shape: Fillet Thanks for watching. --------------------------------------------------------------- For more information on ZW3D, please visit : https://www.zwsoft.com/ ---------------------------------------------------------------- You can also follow Cad Thinkers at: Instagram: https://www.instagram.com/cadthinkers/ Facebook : https://www.facebook.com/CADThinkers/ Twitter: https://twitter.com/CadThinkers Pinterest: https://www.pinterest.pt/cadthinkers/ GrabCad: https://grabcad.com/cad.thinkers-1
ZW3D 3dcad cadtutorial zw3dtutorial zw3d surfacemodelling 3dcadmodelling cadmodelling modelling

ZW3D Tutorial - Surface Modelling - Intermediate level - Exercise 10

CAD Thinkers
in Modeling
1 0 Intermediate
Elements used in all sketches are as follow: - Line - Spline - Offset - Dimension - Constraints Elements used in 3D environment is as follow: - Datum Plane - Basic Shape: Revolve - Free Form: Extend Face - Wireframe: Project to Face - Wireframe: Trim/Extend - Free Form: Split with Curves - Free Form: Mirror - Free Form: Face at Angle - Basic Shape: Loft - Free Form: Reverse Direction - Free Form: Sew - Free Form: Pattern - Free Form: Trim to Faces - Free Form: N-Sided - Shape: Fillet Thanks for watching. --------------------------------------------------------------- For more information on ZW3D, please visit : https://www.zwsoft.com/ ---------------------------------------------------------------- You can also follow Cad Thinkers at: Instagram: https://www.instagram.com/cadthinkers/ Facebook : https://www.facebook.com/CADThinkers/ Twitter: https://twitter.com/CadThinkers Pinterest: https://www.pinterest.pt/cadthinkers/ GrabCad: https://grabcad.com/cad.thinkers-1
ZW3D modelling cadmodelling 3dcadmodelling surfacemodelling zw3d zw3dtutorial cadtutorial 3dcad

Impresión 3D con ZW3D

Rafael Escobar
in Modeling
1 0 Intermediate
Vista rápida de como modelar y enviar a una impresora 3D con ZW3D.
ZW3D

IronCAD - Linked Cross Sections

Nick
in Modeling
0 0 Intermediate
Create independent parts all driven by the one linked cross section
IronCAD section cross linked ironcad structural

IronCAD - Multifeature part from one Cross Section

Nick
in Modeling
0 0 Intermediate
Create a pipe section with flanges at each end, using one circle to drive the bore diameter with flange OD offset from this.
IronCAD mechanical section cross pipe ironcad

JP_005_GrabCAD Print: 部品摺動部の隙間をＦＤＭ造形する方法

Stratasys Japan
in Assemblies
0 0 Intermediate
造形後にはめ合わせるまたは摺動（スライド）させる必要がある部品を3D造形する場合、CADシステムで該当する部品の間にある程度の隙間を設ける必要があります。目安として、造形する際の積層ピッチの2倍の隙間から始めるとよいでしょう。ただし、小さいサイズで何度かテスト造形を行い、積層ピッチの2倍の法則が特定の状況や向きに当てはまるかを確認することをお勧めします。それでは3Dプリンタで楽しくモノづくりをしていきましょう！
GrabCAD Print fdm 3d printing clearance sliding
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.