Tutorials

How to FDM Print for Part Sliding Clearance

13 4 Intermediate
If you are 3D printing parts that have to fit/slide together after printing, you will need to put some sort of clearance between those parts in your CAD system. A good starting place is a clearance 2x the layer height you are going to print at, but you should make a few smaller test prints at different clearances to see if the 2x layer height rule holds for your particular situation and orientation. Have fun and happy printing!

Need to put lights into a render.

4 0 Intermediate
Use keyshot IES light...By this you can give real looking lightening effect

How to create an environment in keyshot by yourself?

3 0 Intermediate
You can make your own environment by editing your HDRI

IronCAD - Using the Co-ordinate system to create a section

2 0 Intermediate
Use the Co-Ordinate systems to create a section plane. This is a handy alternative the section tool, as it does not cut the solid model.

Stacking Your Parts in Z for FDM

2 0 Intermediate
Have long thin flat parts you’ve always wanted to print right on top of each other in FDM but the slicer never allowed you to? Learn how to use this exclusive new feature in GrabCAD Print Pro!

How to Open Your Model in KeyShot

2 0 Intermediate
Within GrabCAD, you have a pulldown in the model viewing screen with the option to Open with KeyShot. When a model is open inside a project of the Workbench interface, you and any collaborators will see a Open With menu above the model in the upper right corner. With a single click, members of the project are able to select Open with KeyShot to launch and open the model directly inside KeyShot. With KeyShot installed, the model will open immediately inside the KeyShot realtime rendering environment. A video of the functionality can be viewed here. Once you have your model in KeyShot, you're ready to render! To get started quickly, see the quick tips and tutorials available here: http://keyshot.com/learning/

How to create a perforated sheet metal

1 1 Intermediate
could be that you want to use rectangular patern. by creating one hole and copying it over the surface of the sheet. i actually never use sheet metal parts but here it goes.

How to add a label onto a surface in Keyshot without bleedover to other surfaces?

1 1 Intermediate
The following is an easy way to do it in KeyShot itself..Hope it helps...

IronCAD - Linked Cross Sections

0 0 Intermediate
Create independent parts all driven by the one linked cross section

How to Get More Eyes on Your Design

0 0 Intermediate
One way we find what people are creating with KeyShot is by performing a search for the software. Searching for the word 'keyshot' will show the content where people used 'keyshot' in the description or as a tag. If you want more eyes on your design, make sure to fill out the description and enter tags. List the software used in the description or tag, as many people search for these terms to see where how the software is being used and many software companies search to share those models and images with others. https://grabcad.com/library/tag/keyshot

35Tutorials'''' KeyShot tips(Step By Step)"''

0 0 Intermediate
render using keyshot

tutorial : how render toon with showcase pro ?

0 0 Intermediate
render toon with showcase pro

IronCAD - Multifeature part from one Cross Section

0 0 Intermediate
Create a pipe section with flanges at each end, using one circle to drive the bore diameter with flange OD offset from this.

Tutorial : how to render with showcase pro

0 0 Intermediate
Tutorial : how to render with showcase pro

JP_005_GrabCAD Print: 部品摺動部の隙間をFDM造形する方法

0 0 Intermediate
造形後にはめ合わせるまたは摺動(スライド)させる必要がある部品を3D造形する場合、CADシステムで該当する部品の間にある程度の隙間を設ける必要があります。目安として、造形する際の積層ピッチの2倍の隙間から始めるとよいでしょう。ただし、小さいサイズで何度かテスト造形を行い、積層ピッチの2倍の法則が特定の状況や向きに当てはまるかを確認することをお勧めします。それでは3Dプリンタで楽しくモノづくりをしていきましょう!