Tutorials

can you give drawing models with dimensions to practice?

13 0 Intermediate
try

can you give drawing models with dimensions to practice?

7 0 Intermediate
practice models

Tutorial:How to model Hook in Pro/ENGINEER?

7 1 Beginner
Here's the answer for it.. Step 1

How to use Welding

4 0 Beginner
In the ProE and Creo is possible to create different types of Welds. System automatically calculate with used materials and Weld process. This information is possible to show in the Weld symbol and drawings.

Tutorial: Welding In Proe

4 0 Intermediate
Welding in Pro E (Creo 2)

how to make pattern along a curve?

3 1 Beginner
The answer is here.

How to model a Mercedes-Benz Logo in proEngineer?

3 0 Beginner
Just thought of adding a tutorial of modelling a Benz logo in proEngineer.:) Enjoy..http://grabcad.com/library/mercedes-benz-logo...D file for learning...

Tutorial: Modelling spring having any given trajectory in Pro/E

2 1 Beginner
Download Model: http://grabcad.com/library/given-trajectory-spring

How to analyse Pro Engineer component in Ansys 10.0 welding property?

2 0 Intermediate
u can weld through following step in workbench There are one "WELD" option in geometry. there u can create weld

3D Modeling of a Braitenberg Vehicle in 4 Steps using Autodesk 123D Design

2 0 Intermediate
This tutorial is suitable for designers who have a basic knowledge of using the open source product Autodesk 123D Design. The steps to build a Breitenberg vehicle are as follows: 1. Modeling a wheel: a cylinder with a diameter of 2 cm and a height of 0.5 cm is placed in the workspace. Drill a hole in it by drawing a circle with a diameter of 0.3 cm and extruding - 0.5 cm with the Extrude tool. We soften the edges of the cylinder with Fillet Radius: 0.5. 2. Clone the wheel: rotate the resulting wheel 90° along the Z axis and copy it with Ctrl+C and Ctrl+V. 3. Modeling the vehicle body: regarding the design of the vehicle body, there are various options. In this case the author models a classic vehicle, which is most often shown in the bibliographic sources. After drawing and extruding a surface with the desired shape we apply Fillet with radius 35 on the back edge and with 30 on the front edge for a contemporary design (i could provide more images if it is needed). On the selected side edges we successively apply Fillet with a radius of 9. 4. Make a special place for the sensor: it is necessary to select the square plane that is located in the middle of the case and successively apply Sketch > Project, Sketch > Offset and Construct > Extrude with a negative value.

Helical pattern of holes in pro-e.

1 1 Beginner
I hope, this will be useful for you

Smoking Shelter

1 0 Intermediate
Building the smoking shelter. I have full workshop drawings for making all of the parts. Contact me at gbm60@hotmail.com if you are interested in making the first real one.

Top down assembly with skeleton model in pro engineer.

1 0 Beginner
following general steps to make top down assembly from skeleton model

how to roll back the model in proe5, is there any way like solid works

1 0 Beginner
See pic.

How to Copy-Paste parameters from one part to another in Pro-E?

1 0 Intermediate
It doesn't the parameters if there is a parameter which has a restriction. I've deselected those parameters and copy and paste the rest into the part. You will have to create the restricted parameters yourself.