Tutorials

  • Design & CAD ×
  • Engineering Fundamentals ×
  • Autodesk 123D ×
  • IronCAD ×
  • Luxology ×
  • Mastercam ×
  • VRML / WRL ×

Mastercam 2021 (CAD+CAM)

MANOJ VISHWAKARMA
in Modeling
6 2 Intermediate
Mastercam 2021 3D Modeling tutorial
Mastercam cnc cam cad mastercam

IronCAD - Top 10 Tips

Nick
in Modeling
3 5 Expert
Ten top tips for IronCAD
IronCAD hints tips ironcad

Part 3: Setting Up for Soft Proofing in Adobe® Photoshop®

Naftali Eder
in Process
3 0 Beginner
This tutorial is a continuation of my last tutorial "Part 2: Introduction to Color Proofing: Uploading the Stratasys Color Profile". It will demonstrate how to How to Use Adobe® Photoshop® to simulate how colors selected on screen will print on the J750 and how to adjust your input color if required.
VRML / WRL polyjet rgb matching proofing j750 stratasys photoshop color

IronCAD - Using the Co-ordinate system to create a section

Nick
in Modeling
2 0 Intermediate
Use the Co-Ordinate systems to create a section plane. This is a handy alternative the section tool, as it does not cut the solid model.
IronCAD section cross

How do I change the scale in a DXF when I import it into Mastercam?

ady
in Design & CAD
2 1 Beginner
Here is what I did. Sorry about my bad english.
Mastercam neck stratocaster dxf

3D Modeling of a Braitenberg Vehicle in 4 Steps using Autodesk 123D Design

Yoana Ivanova
in Modeling
2 0 Intermediate
This tutorial is suitable for designers who have a basic knowledge of using the open source product Autodesk 123D Design. The steps to build a Breitenberg vehicle are as follows: 1. Modeling a wheel: a cylinder with a diameter of 2 cm and a height of 0.5 cm is placed in the workspace. Drill a hole in it by drawing a circle with a diameter of 0.3 cm and extruding - 0.5 cm with the Extrude tool. We soften the edges of the cylinder with Fillet Radius: 0.5. 2. Clone the wheel: rotate the resulting wheel 90° along the Z axis and copy it with Ctrl+C and Ctrl+V. 3. Modeling the vehicle body: regarding the design of the vehicle body, there are various options. In this case the author models a classic vehicle, which is most often shown in the bibliographic sources. After drawing and extruding a surface with the desired shape we apply Fillet with radius 35 on the back edge and with 30 on the front edge for a contemporary design (i could provide more images if it is needed). On the selected side edges we successively apply Fillet with a radius of 9. 4. Make a special place for the sensor: it is necessary to select the square plane that is located in the middle of the case and successively apply Sketch > Project, Sketch > Offset and Construct > Extrude with a negative value.
Autodesk 123D breitenberg vehicle

how to use rotation in axis like autocad in mastercam

Abdul Haseeb Malik
in Design & CAD
1 0 Intermediate
I never tried MasterCam... may be you will find your answer in this tutorial
Mastercam

how can i download luxology materials for solid works?

Jeverson Fronza
in Design & CAD
1 0 Intermediate
Do not know if still has doubts, but to access the download, you have to have a license the software "MODO" or a client account of SolidWorks (Customer Portal).
Luxology

How to create a perforated sheet metal

Bob Heijningen
in Design & CAD
1 1 Intermediate
could be that you want to use rectangular patern. by creating one hole and copying it over the surface of the sheet. i actually never use sheet metal parts but here it goes.
IronCAD perforations

How to Download & Install MasterCAM x9

The savvy engineer
in Modeling
1 0 Beginner
How to Download & Install MasterCAM x9
Mastercam mastercam

Tutorial: How to convert spline into a lines and arcs?

ady
in Design & CAD
1 0 Beginner
Another option but in this case I will convert randomly shape splines
Mastercam cadcam mastercam

IRONCAD Training 01-04 | Drag & Drop Modeling

Emil.Rindell
in Modeling
1 0 Beginner
Four videos that describes the Drag & Drop Modeling basics in IRONCAD.
IronCAD training triball easy cad user friendly beginner 3d cad ironcad

Tutorial MasteCam 2018 Part 1

Eko Sungkono
in Drafting
1 0 Beginner
Cara Membuat Design Gambar 2D
Mastercam

IronCAD - Linked Cross Sections

Nick
in Modeling
0 0 Intermediate
Create independent parts all driven by the one linked cross section
IronCAD section cross linked ironcad structural

Twisted Pipe 90 deg. bend

Adegbuyi Adeyemi
in Modeling
0 0 Beginner
Creating a 90 degrees twisted pipe. Follow with your own design tool. It's important that the diameter of the guiding torus be >> x 3 pipe dia. The intent is to demonstrate some tools and follow someone to follow with the steps. The steps can be done a lot faster, more efficient manner or using other approaches. Like, share and comment for others to benefit.
VRML / WRL hollow torus bend pipe
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.