Tutorials

  • Design & CAD ×
  • CFD ×
  • Kinematics ×
  • Snagit ×
  • Kompas-3D ×
  • Pro/Engineer Wildfire ×
  • GrabCAD Workbench ×

Параметризация модели через переменные в "Компас-3D"

Egor Chugay
in Modeling
13 0 Intermediate
Tutorial relevant for users "Kompas-3D". I don't know if they "Kompas-3D" is used in other countries, but I know "Kompas-3D" most popular in Russia, so further explanation will be in Russian. If you need English version, please comment tutorial, and I make translate. В данной заметке рассмотрено построение параметрической модели на примере корпуса микросхем типа QFP, модель строится в САПР «Компас-3D». Представленный ниже способ - лишь один из многих возможных. И я искренне надеюсь, что кому-то он поможет лучше разобраться 3D моделированием, а кто-то увидит, как оптимизировать процесс. Несмотря на то, что построение модели выполнялось в «Компас-3D», подобные механизмы могут присутствовать и в иных системах, так что возможно пригодится пользователям другого ПО. Описанный ниже способ предполагает наличие определенного навыка работы с 3D моделями, и не содержит подробного описания последовательностей нажатия клавиш, скорее описана методика построения и взаимосвязь объектов.
Kompas-3D qfp tutorial parametric kompas-3d

can you give drawing models with dimensions to practice?

vigneshwaran I
in Design & CAD
13 0 Intermediate
try
Pro/Engineer Wildfire

can you give drawing models with dimensions to practice?

khawer mahmood
in Design & CAD
7 0 Intermediate
practice models
Pro/Engineer Wildfire

How do i track changes by others?

Sara Sigel
in Design & CAD
5 1 Intermediate
Your partner can upload a new version, leave a sketch, or write a comment to let you know about a change. If you have notifications setup, then you'll get an email when any of these happen. https://grabcad.com/email/edit You can also compare changes between versions, which is very useful. For a visual comparison of what is different from one version to the next, see the steps, below.
GrabCAD Workbench file grabcad cad workbench management version revision

Tutorial: Welding In Proe

Milan Ilić
in Design & CAD
4 0 Intermediate
Welding in Pro E (Creo 2)
Pro/Engineer Wildfire tutorial enginner pro parametric creo welding

how to draw campbell diagram in ansys pls hlp me

harikrushna dodiya
in Design & CAD
3 0 Intermediate
campbell diagram step start from 9 plz see step 9
GrabCAD Workbench

How can I change picture order after uploading a model ?

shubham gupta
in Design & CAD
2 3 Intermediate
Please go through this tutorial.
GrabCAD Workbench order image gif

How to analyse Pro Engineer component in Ansys 10.0 welding property?

harikrushna dodiya
in Design & CAD
2 0 Intermediate
u can weld through following step in workbench There are one "WELD" option in geometry. there u can create weld
Pro/Engineer Wildfire property weld

how do I choose a picture (rendering) that will appear first in the library?

Inspire
in Design & CAD
1 0 Intermediate
1yshetynrw7uywru yuuywrywr
GrabCAD Workbench

how to draw campbell diagram in ansys pls hlp me

harikrushna dodiya
in Design & CAD
1 0 Intermediate
in modal analysis go to analysis setting than go rotodynamic check coriollis effect on than do campbell diagram on feed your data and solve it
GrabCAD Workbench

Smoking Shelter

David Crosby
in Assemblies
1 0 Intermediate
Building the smoking shelter. I have full workshop drawings for making all of the parts. Contact me at gbm60@hotmail.com if you are interested in making the first real one.
Pro/Engineer Wildfire shelter smoking

How to Copy-Paste parameters from one part to another in Pro-E?

martin Cronje
in Design & CAD
1 0 Intermediate
It doesn't the parameters if there is a parameter which has a restriction. I've deselected those parameters and copy and paste the rest into the part. You will have to create the restricted parameters yourself.
Pro/Engineer Wildfire values paste parameters copy proe pro pro-e

how to do wire rope in pro e

Tushar Wandhare
in Design & CAD
1 1 Intermediate
wire rope can be design by using WRAP command.
Pro/Engineer Wildfire

solidworks 2010 to proe wildfire5

Srijith.M.R.Nair
in Design & CAD
0 0 Intermediate
First you have to save the part ans the assembly files in either step or iges format . This can be done by using the save as option and selecting the file type. then you can open that part or assembly in most of the modelling softwares such as pro e creo nx etc
Pro/Engineer Wildfire

how to edit extrude without deleting pattern

Huy Pham
in Design & CAD
0 0 Intermediate
I can help you
Pro/Engineer Wildfire
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.