Tutorials

tutorial : how to open solidworks files in sketchup

8 4 Intermediate
open solidworks files in sketchup

How to FDM Print for Part Sliding Clearance

13 4 Intermediate
If you are 3D printing parts that have to fit/slide together after printing, you will need to put some sort of clearance between those parts in your CAD system. A good starting place is a clearance 2x the layer height you are going to print at, but you should make a few smaller test prints at different clearances to see if the 2x layer height rule holds for your particular situation and orientation. Have fun and happy printing!

Stacking Your Parts in Z for FDM

2 0 Intermediate
Have long thin flat parts you’ve always wanted to print right on top of each other in FDM but the slicer never allowed you to? Learn how to use this exclusive new feature in GrabCAD Print Pro!

(VIDEO) Export SolidWorks File to Sketchup (English)

4 0 Intermediate
================= ================= DO NOT CLICK HERE: http://bit.ly/projetos_infinity ================= ================= Export SolidWorks File to Sketchup (English) Exporting and Importing from Solidworks to Sketchup In this tutorial I explain how to export from sketchup to solidworks, and give tips on how to use solidworks power surfacing tools, and teach you how to paint stl files. join our youtube community: https://www.youtube.com/channel/UCF2k47g7uAo0lM-kA13V6jQ?sub_confirmation=1 see how I exported this sketchup human to solidworks https://www.youtube.com/watch?v=tPsQDriOrIA Here's how to take a solidworks whatsapp course with me: https://www.youtube.com/watch?v=RQgoTn96wAw&t=174s

How to make tangent cuts to a curved solid

4 0 Intermediate
Hi ! If only rendering is necessary , basic SW material such as perforated rubber can make the job. Arrange color, resize map scale and it will be done.

How to make tangent cuts to a curved solid

1 0 Intermediate
easy :) ask questions where stuck.

JP_005_GrabCAD Print: 部品摺動部の隙間をFDM造形する方法

0 0 Intermediate
造形後にはめ合わせるまたは摺動(スライド)させる必要がある部品を3D造形する場合、CADシステムで該当する部品の間にある程度の隙間を設ける必要があります。目安として、造形する際の積層ピッチの2倍の隙間から始めるとよいでしょう。ただし、小さいサイズで何度かテスト造形を行い、積層ピッチの2倍の法則が特定の状況や向きに当てはまるかを確認することをお勧めします。それでは3Dプリンタで楽しくモノづくりをしていきましょう!

How to smooth sides

2 0 Intermediate
This will teach you how to smoothen the sides of a shape.

SketchUp Tutorials for Interior design - 10 Rectangle tool

0 0 Intermediate
SketchUp Tutorials for Interior design Please click on link for watch video - https://youtu.be/QXC4eZVqIR4

SketchUp Tutorials for Interior design - 11 Rotated rectangle tool

0 0 Intermediate
SketchUp Tutorials for Interior design Please Click on link for watch video. https://youtu.be/aa52U5VsqWc

MODELING BOAT IN SKETCHUP PART 3

1 0 Intermediate
https://www.youtube.com/watch?v=zm8aevdpPN4&t=91s

modeling boat in SketchUp part 2

0 0 Intermediate
https://www.youtube.com/watch?v=9rz9Yd6l2iE