Tutorials

Tutorials:-Working with Power MILL " PART I" To Generate the Programs(G-coded & M-coded) For Various CNC Machines.

8 1 Beginner
Let Start With Beginning..

Tutorials:-Working with Power MILL "PART IV" Finish Machining Strategies.

4 0 Intermediate
Finishing strategies machine the actual component form and where applicable, follow on from the Area Clearance operation. Suitable values are required to control the accuracy and amount of excess material to be left on a component by a tool path. The parameters used for this purpose are called Thickness and Tolerance

Make a Motorcycle in TinkerCAD

3 0 Beginner
Design a motorcycle in TinkerCAD. Step by Step instructions that are written for middle school aged students. If you have dual screens, watch on one, complete on the other. Otherwise, watch a little, then do a little. If you make something awesome, share an image @HLModtech on Instagram, Facebook or Twitter.

Tutorials:-Working with Power MILL " PART II" Machining Setup

3 0 Beginner
Here is the Next Part of Working with Power Mill.. Follow the Steps and You will found your way with Power Mill. Some text are Referenced from Book and Online Training Tutorials Thanks and Enjoy..!!

scaling in Tinker CAD

3 1 Beginner
How to use TinkerCAD.

Tutorials:-Working with Power MILL " PART I" To Generate the Programs(G-coded & M-coded) For Various CNC Machines.

2 0 Beginner
After Step 12 here the Remain Things you Have to do...:-

When the toolpath is to be verified to be checked for gouges?

2 0 Intermediate
Hello. I hope your answer is yes

Tutorials:-Working with Power MILL "PART IV" Finish Machining Strategies.

2 0 Intermediate
Raster, Radial, Spiral, and Pattern Finishing. Introduction. This section will cover Finishing strategies created by the downward projection of a Pattern, which include four types, Raster, Radial, Spiral and (user defined) Pattern. PowerMILL generates the toolpaths by projecting a wireframe form down the Z-axis onto the model. The standard patterns applied in Raster, Radial, and Spiral are achieved by entering values directly into the Finishing Form. The resultant Pattern can be displayed by selecting Preview before executing the command by selecting Apply. The Pattern option requires a user-defined geometric form (active Pattern), which is projected down Z onto the model as a tool path.

Tutorials:-Working with Power MILL "PART III" 3D Area Clearance.

2 0 Beginner
next here

problem : powermill changes the orientation of files imoprted in igs format from solidworks

1 0 Intermediate
Don't worry about the orientation just simply rotate it through your mouse. and If you are thinking of wrong axis direction than just follow these steps:-

FREE - TINKERCAD - TUTORIAL

1 0 Beginner
Don't need to download any software, it is freely available online This tutorial will help to design 3D blocks very easily , just go through my video lectures on Tinkercad on my youtube channel

Autodesk TinkerCAD Basics

1 1 Expert
Hello my name is Vijay and I am a designer in TinkerCAD. This tutorial is to learn the basics of TinkerCAD from Noob to proffesional.You can also ask any questions regarding in the designing of TinkerCAD.

Tutorials:-Working with Power MILL "PART V" Toolpath Leads and Links

1 0 Intermediate
Hello Friends, This tutorial continues for power mill Guidance.

Tutorials:-Working with Power MILL "PART V" Toolpath Leads and Links

1 0 Intermediate
Z Heights Skim and Plunge distance provide variable control of rapid move heights within a component. These operate in conjunction with Safe Z and Start Z to minimize slow and unnecessary movement of the tool in fresh air while machining the component form. Skim distance – An incremental distance above the model at which rapid moves occur from the end of one tool track to the start of the next. The tool rapids across the model clearing the highest point along its route by the Skim value. Plunge distance – An incremental distance above the local component surface where a downward rapid movement of a tool changes to plunge rate.

Tutorials:-Working with Power MILL "PART V" Toolpath Leads and Links

1 1 Intermediate
Links To provide for more efficient movement of the tool across the component the link moves that connect adjacent tool tracks can be defined in several different ways. Short/Long Threshold - This defines the distance limit up to which the Short - Links apply. Any move from the end of a tool track to the start of the next, which exceeds this distance is defined as a Long - Link move. For Short links the available options include Safe Z, Incremental, Skim, On Surface, Stepdown, Straight, and Circular Arc. For Long links the available options include Safe Z, Incremental, and Skim. Safe links apply only at the start and end of a toolpath the available options being Safe Z, Incremental, and Skim. For applications where a machine control system will permit arc fitting of rapid moves the Arc Fit Rapid Moves box can be ticked along with a suitable Radius based on the active tool diameter TDU (Of particular benefit to High Speed Machining). •Activate the toolpath 1_1 created earlier in the Leads section. •Set the Leads In and Out to None, if not already set. Press Apply.