Tutorials

Mastercam 2021 (CAD+CAM)

6 2 Intermediate
Mastercam 2021 3D Modeling tutorial

How do I change the scale in a DXF when I import it into Mastercam?

2 1 Beginner
Here is what I did. Sorry about my bad english.

3D Modeling of a Braitenberg Vehicle in 4 Steps using Autodesk 123D Design

2 0 Intermediate
This tutorial is suitable for designers who have a basic knowledge of using the open source product Autodesk 123D Design. The steps to build a Breitenberg vehicle are as follows: 1. Modeling a wheel: a cylinder with a diameter of 2 cm and a height of 0.5 cm is placed in the workspace. Drill a hole in it by drawing a circle with a diameter of 0.3 cm and extruding - 0.5 cm with the Extrude tool. We soften the edges of the cylinder with Fillet Radius: 0.5. 2. Clone the wheel: rotate the resulting wheel 90° along the Z axis and copy it with Ctrl+C and Ctrl+V. 3. Modeling the vehicle body: regarding the design of the vehicle body, there are various options. In this case the author models a classic vehicle, which is most often shown in the bibliographic sources. After drawing and extruding a surface with the desired shape we apply Fillet with radius 35 on the back edge and with 30 on the front edge for a contemporary design (i could provide more images if it is needed). On the selected side edges we successively apply Fillet with a radius of 9. 4. Make a special place for the sensor: it is necessary to select the square plane that is located in the middle of the case and successively apply Sketch > Project, Sketch > Offset and Construct > Extrude with a negative value.

how to use rotation in axis like autocad in mastercam

1 0 Intermediate
I never tried MasterCam... may be you will find your answer in this tutorial

How to Download & Install MasterCAM x9

1 0 Beginner
How to Download & Install MasterCAM x9

Tutorial: How to convert spline into a lines and arcs?

1 0 Beginner
Another option but in this case I will convert randomly shape splines

Tutorial MasteCam 2018 Part 1

1 0 Beginner
Cara Membuat Design Gambar 2D

Tutorial MasterCAM Sprocket 35 X 0.5

0 1 Intermediate
Tutorial MasterCAM Sprocket 35 X 0.5

Tutorial: How to convert spline into a lines and arcs?

0 0 Beginner
For Circle spline.