Tutorials

How to FDM Print for Part Sliding Clearance

13 4 Intermediate
If you are 3D printing parts that have to fit/slide together after printing, you will need to put some sort of clearance between those parts in your CAD system. A good starting place is a clearance 2x the layer height you are going to print at, but you should make a few smaller test prints at different clearances to see if the 2x layer height rule holds for your particular situation and orientation. Have fun and happy printing!

LUGER 9MM PROJECT

13 0 Intermediate
LUGER 9 mm See video. https://youtu.be/ifvvpdlOeuQ

Matte or Glossy? Which Finish to Use for Your 3D Prints and When.

9 0 Beginner
Matte or Glossy? That is the question. PolyJet users often ask themselves whether they should print a part with a matte finish or a glossy finish. And not without reason. The type of finish can totally alter the look, feel, color, and even strength and durability of two otherwise identical parts. Each option has its own benefits and implications that need to be considered. In this tutorial we will give an overview of matte and glossy, compare the pros and cons of each, and offer examples that clearly show what each finish type has to contribute. Finally, we will wrap up with a quick breakdown of when to use what.

IronCAD - Top 10 Tips

3 5 Expert
Ten top tips for IronCAD

LAMP DESIGN.

2 0 Beginner
LAMP DESIGN. Light & Shadow. See video: https://www.youtube.com/watch?v=esnyU7ws4Fc

IronCAD - Using the Co-ordinate system to create a section

2 0 Intermediate
Use the Co-Ordinate systems to create a section plane. This is a handy alternative the section tool, as it does not cut the solid model.

Stacking Your Parts in Z for FDM

2 0 Intermediate
Have long thin flat parts you’ve always wanted to print right on top of each other in FDM but the slicer never allowed you to? Learn how to use this exclusive new feature in GrabCAD Print Pro!

COVID MASK DESIGN

2 0 Beginner
COVID MASK DESIGN See video: https://youtu.be/dUNSE50tm58

How to do a TRIFOIL KNOT DESIGN

1 1 Beginner
See video. https://www.youtube.com/edit?o=U&video_id=ki-eW7W6Bnc

How to create a perforated sheet metal

1 1 Intermediate
could be that you want to use rectangular patern. by creating one hole and copying it over the surface of the sheet. i actually never use sheet metal parts but here it goes.

PLASTIC COVER & MOLD

1 2 Beginner
PLASTIC COVER & MOLD See video: https://youtu.be/GIDRJFsyOpY

IRONCAD Training 01-04 | Drag & Drop Modeling

1 0 Beginner
Four videos that describes the Drag & Drop Modeling basics in IRONCAD.

JP_011_GrabCAD Print: 「マットかグロス?」3D造形でどのような場合にどちらの仕上げを使用すればよいのか

1 0 Beginner
マット(艶消し)にするか、それともグロッシー(光沢)にするか、それが今回のテーマです。 PolyJetプリンタをお使いの皆さんは、部品をマット仕上げにすべきか、グロッシー仕上げにすべきかで悩むことがよくあります。 皆さんが頭を悩ませるのも無理ありません。それ以外の点はまったく同じの2個の部品でも、仕上げのタイプが異なると、見た目、感触、色、そして強度や耐久性までもががらりと変わってしまう可能性があるのです。どちらの仕上げにもそれぞれ、考慮すべき独自のメリットと影響があります。 このチュートリアルでは、マット仕上げとグロッシー仕上げの概要を説明し、それぞれの長所と短所を比較し、それぞれのタイプがどのような仕上がりにつながるのかを明確に示す例を紹介します。そして最後に、どのような場合にどちらの仕上げを使用すればよいのかを簡単に分類してまとめとします。

GrabCAD Print Pro™ - Per Part Groups For Service Bureaus

1 0 Expert
The premium version of GrabCAD Print™, GrabCAD Print Pro™ is now available! This version includes new & enhanced features. This tutorial will explain per part estimation & assembly grouping!

TUTORIAL 54: Solidworks / KeyCreator

0 0 Beginner
See Video: https://youtu.be/Iabs4R-oQUE