Tutorials

  • Design & CAD ×
  • Standards ×
  • Snagit ×
  • Alibre Design ×
  • Pro/Engineer Wildfire ×

can you give drawing models with dimensions to practice?

vigneshwaran I
in Design & CAD
13 0 Intermediate
try
Pro/Engineer Wildfire

Proper Method to Produce Lobster-back Duct Bends

lawrie
in Drafting
3 1 Beginner
One type of industrial component I have been involved with the design and manufacture of is lobster-back bends. This type of duct bend is made up of segments cut from flat sheets or plates, rolled into cylindrical parts, then assembled. These can be light sheet-metal or manufactured from thick plate. This quick tutorial is a supplement to the one I produced an outline of a method I have used modeling this type of component using Alibre Design. As this supplement concerns producing parts ready for manufacture and applies to whatever software you have used, that is not important as this short tutorial is to outline turning your modeled bend into the flat profile ready to be made into the completed bend. In this modern world, the bend parts will be cut out using CNC laser, or CNC Plasma cutting machines. Sometimes we produce the nc programs ourselves or we are required to produce the correct files for the laser / plasma department to program and cut out. Making the program to cut out the parts starts normally from a 2D dxf file at a scale of 1 : 1. This is the first part of the process that has to be correct. If you produce this dxf incorrectly the finished parts will be useless. Producing this at the right scale, 1 : 1 is different with different 3D cad applications, other problems can be caused by you working in different drawing units. If you are not doing the program, talk to the person who is to make sure you produce the dxf as required. Having a large quantity of wrongly cut parts is not a good thing
Alibre Design

How to use helical sweep cut to make threads in Pro-E\Creo ??

Saurabh Kumar
in Design & CAD
0 0 Beginner
Ok lets get started... Used a simple bolt....
Pro/Engineer Wildfire helical creo elements sweep threads proe learning

can you give drawing models with dimensions to practice?

khawer mahmood
in Design & CAD
7 0 Intermediate
practice models
Pro/Engineer Wildfire

How do i convert .SLDPRT to .STEP?

Baljeet Thakur
in Design & CAD
0 1 Beginner
Open the .sldprt file in solidworks that you want to save in any other format
Pro/Engineer Wildfire

How to model a Hexagonal Nut in Pro/E?

elamurugabarati
in Design & CAD
0 0 Beginner
here is the step by step instruction to create a hex nut in Pro engineer wildfire 5.0.
Pro/Engineer Wildfire nut hexagonal

Lobsterback Duct Bends Sheetmetal Method

lawrie
in Modeling
1 0 Beginner
This is the method I use to construct lobster back bends with sheet metal tools that I can produce flat patterns from, These flat patterns can then be used to produce files for CNC profile cutting machines. I have come across other ways of doing this using surfaces, thickened and turned into sheet metal parts. The software I am using is Alibre Design. As the version I have is low on surfacing tools I have found this a good way to model lobster back bends, which I have been involved with the design and manufacture for many years.
Alibre Design

how to make pattern along a curve?

Rajesh kumar
in Design & CAD
3 1 Beginner
The answer is here.
Pro/Engineer Wildfire

Tutorial: Welding In Proe

Milan Ilić
in Design & CAD
4 0 Intermediate
Welding in Pro E (Creo 2)
Pro/Engineer Wildfire tutorial enginner pro parametric creo welding

Repeat command in Assembly mode of proEngineer

c0cd00a1
in Design & CAD
0 0 Beginner
Here's a small tutorial on how to use the repeat command in proEngineer assembly mode..If we want to use a bolt of same dimension @ different locations (with same constraints)..then this command proves to be very useful..
Pro/Engineer Wildfire

how to roll back the model in proe5, is there any way like solid works

Charoenpon555
in Design & CAD
1 0 Beginner
See pic.
Pro/Engineer Wildfire

Using a reference image in pro e & creo elements to create a logo or symbol

prabhakaran
in Design & CAD
0 0 Beginner
continue
Pro/Engineer Wildfire reference creo engineer pro importing image import tracing

what is the use of mapkey in pro e or creo elements?

prabhakaran
in Design & CAD
0 0 Beginner
Follow the steps to create a shortcut using mapkey
Pro/Engineer Wildfire

Creating a Torsion or Tension Spring Using Creo/Elements pro 1.0

c0cd00a1
in Design & CAD
0 0 Beginner
Here are the steps...
Pro/Engineer Wildfire creo parametric

Tutorial on Four bar mechanism animation in creo or pro e wildfire.

prabhakaran
in Design & CAD
0 0 Beginner
Download these pro e files and practise to create mechanism ...below
Pro/Engineer Wildfire mechanism bar animation linkage four
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.