Proper Method to Produce Lobster-back Duct Bends

3 1 Beginner
One type of industrial component I have been involved with the design and manufacture of is lobster-back bends. This type of duct bend is made up of segments cut from flat sheets or plates, rolled into cylindrical parts, then assembled. These can be light sheet-metal or manufactured from thick plate. This quick tutorial is a supplement to the one I produced an outline of a method I have used modeling this type of component using Alibre Design. As this supplement concerns producing parts ready for manufacture and applies to whatever software you have used, that is not important as this short tutorial is to outline turning your modeled bend into the flat profile ready to be made into the completed bend. In this modern world, the bend parts will be cut out using CNC laser, or CNC Plasma cutting machines. Sometimes we produce the nc programs ourselves or we are required to produce the correct files for the laser / plasma department to program and cut out. Making the program to cut out the parts starts normally from a 2D dxf file at a scale of 1 : 1. This is the first part of the process that has to be correct. If you produce this dxf incorrectly the finished parts will be useless. Producing this at the right scale, 1 : 1 is different with different 3D cad applications, other problems can be caused by you working in different drawing units. If you are not doing the program, talk to the person who is to make sure you produce the dxf as required. Having a large quantity of wrongly cut parts is not a good thing

Top 5 CAD file formats to use!

2 0 Beginner
Link to YouTube video I made about the 5 best CAD file types to use.

how i can get STEP / IGES ???

1 0 Intermediate
STEP / IGES in catia , solidworks , 3ds max , inventor pro .......

Lobsterback Duct Bends Sheetmetal Method

1 0 Beginner
This is the method I use to construct lobster back bends with sheet metal tools that I can produce flat patterns from, These flat patterns can then be used to produce files for CNC profile cutting machines. I have come across other ways of doing this using surfaces, thickened and turned into sheet metal parts. The software I am using is Alibre Design. As the version I have is low on surfacing tools I have found this a good way to model lobster back bends, which I have been involved with the design and manufacture for many years.


1 1 Expert

main boby

1 0 Beginner
main boby

IGES Vs STEP | similarities & differences | which file format is better for CAD software users

0 0 Expert
Hey guys how is going ? hope you're doing well today !! For more videos like this visit Our Site ; 👉 www.thesavvyengineer.com Our Youtube Channel ; 👉 The savvy Engineer : https://bit.ly/2Caeqac