Tutorials

LEGO - 01 Basic Dimensions & Bricks Explained

68 9 Intermediate
I get a lot of questions about how I create LEGO parts. This is Part I - The Basics. Most "standard" parts can be created using only simple math. Standard parts consist of square, circular, and angled blocks - regular geometric blocks. I will refer to BrickLink (www.bricklink.com/), but many others use similar methods: Peeron: http://www.peeron.com/ BrickOwl: http://www.brickowl.com/ Brickipedia: http://lego.wikia.com/wiki/LEGO_Wiki etc.

How do I scale a model in Inventor?

50 13 Beginner
:)

Tutorial: Convert .stl Mesh to Solid File in Autodesk Inventor

7 7 Beginner
I found today a post from a friend (Nuno) asking how to solve this issue, converting an .stl to solid .ipt. Then I remembered that I found something in the past regarding this conversion... Yeap! it was in Autodesk Labs So let me explain with couple of easy steps how this works...

Como dimensionar la matriz y los punzones de un troquel de corte

6 1 Expert
Con este tutorial pretendemos explicar como dimensionar la matriz y los punzones de un troquel de corte, garantizando la tolerancia de fabricación de la pieza así como logrando la mayor vida útil del troquel.

Tutorial: How to use "bend part" feature in Autodesk Inventor?

8 0 Beginner
Tutorial to use "bend part" feature in Autodesk Inventor.

New approach in designing and modelling an Oil pump using Inventor 2016

107 13 Intermediate
Step by step tutorial videos, showing the easy way of modelling an Oil pump using Inventor 2016, how to create the parts, assemble them and drive gears, new approach make use of most Inventor specs, design center with some new tips & tricks ...

How to create NPT (national pipe taper) threads using inventor

13 3 Intermediate
I have had people ask me on here how I model npt threads for some of the parts I make, so I figured I would put it out there for others to see as well. Note: if you look at the threaded models I have on this website you will see that I have clearly taken more time on some of them than others, this tutorial will teach you how to do it the right and proper way.

How to make a sphere in Autodesk Inventor?

2 0 Beginner
As Doug said, revolving a half circle. (the tutorial was made in Inventor pro 2011 but it applies to all versions of Inventor

How to create Rack & Pinion using Inventor 2016

12 0 Intermediate
How to create Rack & Pinion with Inventor 2016 and show the motion??? Step by Step tutorial .... follow the link below https://www.youtube.com/playlist?list=PLCrNndUdp-R2RXvptMFVptVGuLDD0NV2f

How to create a Square to Round (Autodesk Inventor)

21 5 Beginner
This tutorial will run you through the process to create a sheet metal square to round from start to finish. Including flat pattern.

Tutorial: How to use coil feature in Autodesk Inventor?

2 0 Beginner
Tutorial to use coil feature in Autodesk Inventor.

'Tutorial: How to insert images in Autodesk Inventor'

6 0 Beginner
Answer as a tutorial

Problem with extruding 2D Shape in Inventor

0 1 Beginner
ok

Tutorial: How to model a hexagonal bolt in Autodesk Inventor?

1 1 Beginner
Tutorial to model a bolt in Autodesk Inventor.

How to Prepare STL files in Autodesk Inventor

5 0 Intermediate
Autodesk Inventor allows you to save both individual parts and assemblies in STL format, at all design levels. This details how to save out all parts and assemblies.