Tutorials

LUGER 9MM PROJECT

13 0 Intermediate
LUGER 9 mm See video. https://youtu.be/ifvvpdlOeuQ

LAMP DESIGN.

2 0 Beginner
LAMP DESIGN. Light & Shadow. See video: https://www.youtube.com/watch?v=esnyU7ws4Fc

COVID MASK DESIGN

2 0 Beginner
COVID MASK DESIGN See video: https://youtu.be/dUNSE50tm58

3D Modeling of a Braitenberg Vehicle in 4 Steps using Autodesk 123D Design

2 0 Intermediate
This tutorial is suitable for designers who have a basic knowledge of using the open source product Autodesk 123D Design. The steps to build a Breitenberg vehicle are as follows: 1. Modeling a wheel: a cylinder with a diameter of 2 cm and a height of 0.5 cm is placed in the workspace. Drill a hole in it by drawing a circle with a diameter of 0.3 cm and extruding - 0.5 cm with the Extrude tool. We soften the edges of the cylinder with Fillet Radius: 0.5. 2. Clone the wheel: rotate the resulting wheel 90° along the Z axis and copy it with Ctrl+C and Ctrl+V. 3. Modeling the vehicle body: regarding the design of the vehicle body, there are various options. In this case the author models a classic vehicle, which is most often shown in the bibliographic sources. After drawing and extruding a surface with the desired shape we apply Fillet with radius 35 on the back edge and with 30 on the front edge for a contemporary design (i could provide more images if it is needed). On the selected side edges we successively apply Fillet with a radius of 9. 4. Make a special place for the sensor: it is necessary to select the square plane that is located in the middle of the case and successively apply Sketch > Project, Sketch > Offset and Construct > Extrude with a negative value.

How to do a TRIFOIL KNOT DESIGN

1 1 Beginner
See video. https://www.youtube.com/edit?o=U&video_id=ki-eW7W6Bnc

PLASTIC COVER & MOLD

1 2 Beginner
PLASTIC COVER & MOLD See video: https://youtu.be/GIDRJFsyOpY

Tutorial: Change color scheme in DraftSight

1 0 Beginner
Change color scheme in Draftsight

Como trocar idioma do Draftsight

0 0 Intermediate
Para redefinir o idioma do sistema.

TUTORIAL 54: Solidworks / KeyCreator

0 0 Beginner
See Video: https://youtu.be/Iabs4R-oQUE

Aprenda a modelar con KeyCreator

0 0 Beginner
Primeros pasos para comenzar a utilizar KeyCreator, este tutorial le ayudará a inciarse en este mundo del modelado por edición directa.

How to Download & Install Draftsight 2023

0 0 Beginner
How to Download & Install Draftsight 2023

how set the system language

0 0 Intermediate
To set the system language

How to see System Variables list in DraftSight ?

0 0 Intermediate
Use SETVARIABLE command .

SIMPLE & POWERFUL

0 0 Beginner
3D part exercise. See video https://www.youtube.com/watch?v=5R-3CWYiajc