Tutorials

IronCAD - Top 10 Tips

3 5 Expert
Ten top tips for IronCAD

Top 5 CAD file formats to use!

2 0 Beginner
Link to YouTube video I made about the 5 best CAD file types to use.

IronCAD - Using the Co-ordinate system to create a section

2 0 Intermediate
Use the Co-Ordinate systems to create a section plane. This is a handy alternative the section tool, as it does not cut the solid model.

3D Modeling of a Braitenberg Vehicle in 4 Steps using Autodesk 123D Design

2 0 Intermediate
This tutorial is suitable for designers who have a basic knowledge of using the open source product Autodesk 123D Design. The steps to build a Breitenberg vehicle are as follows: 1. Modeling a wheel: a cylinder with a diameter of 2 cm and a height of 0.5 cm is placed in the workspace. Drill a hole in it by drawing a circle with a diameter of 0.3 cm and extruding - 0.5 cm with the Extrude tool. We soften the edges of the cylinder with Fillet Radius: 0.5. 2. Clone the wheel: rotate the resulting wheel 90° along the Z axis and copy it with Ctrl+C and Ctrl+V. 3. Modeling the vehicle body: regarding the design of the vehicle body, there are various options. In this case the author models a classic vehicle, which is most often shown in the bibliographic sources. After drawing and extruding a surface with the desired shape we apply Fillet with radius 35 on the back edge and with 30 on the front edge for a contemporary design (i could provide more images if it is needed). On the selected side edges we successively apply Fillet with a radius of 9. 4. Make a special place for the sensor: it is necessary to select the square plane that is located in the middle of the case and successively apply Sketch > Project, Sketch > Offset and Construct > Extrude with a negative value.

How to create a perforated sheet metal

1 1 Intermediate
could be that you want to use rectangular patern. by creating one hole and copying it over the surface of the sheet. i actually never use sheet metal parts but here it goes.

how i can get STEP / IGES ???

1 0 Intermediate
STEP / IGES in catia , solidworks , 3ds max , inventor pro .......

main boby

1 0 Beginner
main boby

IRONCAD Training 01-04 | Drag & Drop Modeling

1 0 Beginner
Four videos that describes the Drag & Drop Modeling basics in IRONCAD.

IronCAD - Linked Cross Sections

0 0 Intermediate
Create independent parts all driven by the one linked cross section

IronCAD - Multifeature part from one Cross Section

0 0 Intermediate
Create a pipe section with flanges at each end, using one circle to drive the bore diameter with flange OD offset from this.

how can i uplod file in grabcad?

0 0 Beginner
I have added some images so you can see how to upload step by step to GrabCAD. If you need any more help with anything just give me a little PM and if I can help I shall.... Great to have you here and being part of the community now Mehrdad //Handshake.

botella.isg

0 0 Intermediate
botella con ensambles

how can i uplod file in grabcad?

0 0 Beginner
hope this helps

2.2kW 3000RPM

0 0 Intermediate
2,2 kw 3000 RPM radial aspirator

Coffee Mug

0 0 Intermediate
The video explains how to model coffee mug.