Tutorials

Alternative method to find CAD models

11 1 Beginner
Here's an alternative, more reliable method to search for CAD models on GrabCAD, or any other site for that matter. This method is especially helpful when looking for a specific CAD model or key phrase. It can also be used to quickly find information on forums and other help sites. Here's an overview of what this tutorial will be covering: Limit search to specific site: site:<website link> Require certain words to be included: "must include in this order" Exclude unwanted results: -unwanted

Standard Parts Online Library (3D Model & 2D Drawing)

8 0 Intermediate
In this tutorial U can find Standard Parts Online Library (3D Model & 2D Drawing) so u can directly used ...

Mastercam 2021 (CAD+CAM)

6 2 Intermediate
Mastercam 2021 3D Modeling tutorial

IronCAD - Top 10 Tips

3 5 Expert
Ten top tips for IronCAD

IronCAD - Using the Co-ordinate system to create a section

2 0 Intermediate
Use the Co-Ordinate systems to create a section plane. This is a handy alternative the section tool, as it does not cut the solid model.

How do I change the scale in a DXF when I import it into Mastercam?

2 1 Beginner
Here is what I did. Sorry about my bad english.

how to use rotation in axis like autocad in mastercam

1 0 Intermediate
I never tried MasterCam... may be you will find your answer in this tutorial

How to create a perforated sheet metal

1 1 Intermediate
could be that you want to use rectangular patern. by creating one hole and copying it over the surface of the sheet. i actually never use sheet metal parts but here it goes.

How to Download & Install MasterCAM x9

1 0 Beginner
How to Download & Install MasterCAM x9

Tutorial: How to convert spline into a lines and arcs?

1 0 Beginner
Another option but in this case I will convert randomly shape splines

IRONCAD Training 01-04 | Drag & Drop Modeling

1 0 Beginner
Four videos that describes the Drag & Drop Modeling basics in IRONCAD.

Tutorial MasteCam 2018 Part 1

1 0 Beginner
Cara Membuat Design Gambar 2D

IronCAD - Linked Cross Sections

0 0 Intermediate
Create independent parts all driven by the one linked cross section

IronCAD - Multifeature part from one Cross Section

0 0 Intermediate
Create a pipe section with flanges at each end, using one circle to drive the bore diameter with flange OD offset from this.

Tutorial: How to create a helix along a 3D curve

0 0 Beginner
Look the video. Important moments: - The orientation of cross section - Twist profile angle must be more then 360 Angel: 360*15 = 5400, Where 15 - number of coils Result file: http://grabcad.com/library/tutorial-how-to-create-a-helix-along-a-3d-curve-1