Tutorials

How to convert CAD files in Workbench

110 46 Beginner
How to convert file formats, such as sldprt and sldasm files, to STEP, IGES, STL, Parasolid (.x_t), ACIS (.sat), JT, or VRML (.wrl)

How do i track changes by others?

4 1 Intermediate
Your partner can upload a new version, leave a sketch, or write a comment to let you know about a change. If you have notifications setup, then you'll get an email when any of these happen. https://grabcad.com/email/edit You can also compare changes between versions, which is very useful. For a visual comparison of what is different from one version to the next, see the steps, below.

how to draw campbell diagram in ansys pls hlp me

3 0 Intermediate
campbell diagram step start from 9 plz see step 9

IronCAD - Top 10 Tips

3 5 Expert
Ten top tips for IronCAD

how do I choose a picture (rendering) that will appear first in the library?

1 0 Intermediate
1yshetynrw7uywru yuuywrywr

How to upload files to GrabCAD Workbench?

1 1 Beginner
Here is how I created a new Workbench project and a few different ways I uploaded SolidWorks files. This is was also my first time using the upload folders option so I came across a few bugs that I am sure will be worked out but they are not a big deal. Please feel free to leave comments if this worked for you or if you have a different or better way to do it. I will tell you how to start your Workbench project and upload SolidWorks files. I am assuming you know how to create your files. For this tutorial, I will upload a .zip file containing all of the part and assembly files. You can make this many ways but one of the best ways is to use the Pack-and-Go option in SW. Many other CAD programs have a similar option and this makes sure all the required files are included.

How to create a perforated sheet metal

1 1 Intermediate
could be that you want to use rectangular patern. by creating one hole and copying it over the surface of the sheet. i actually never use sheet metal parts but here it goes.

how to draw campbell diagram in ansys pls hlp me

1 0 Intermediate
in modal analysis go to analysis setting than go rotodynamic check coriollis effect on than do campbell diagram on feed your data and solve it

IronCAD - Using the Co-ordinate system to create a section

1 0 Intermediate
Use the Co-Ordinate systems to create a section plane. This is a handy alternative the section tool, as it does not cut the solid model.

How can I change picture order after uploading a model ?

1 2 Intermediate
Please go through this tutorial.

IronCAD - Linked Cross Sections

0 0 Intermediate
Create independent parts all driven by the one linked cross section

IronCAD - Multifeature part from one Cross Section

0 0 Intermediate
Create a pipe section with flanges at each end, using one circle to drive the bore diameter with flange OD offset from this.