Tutorials

Tutorials:-Working with Power MILL " PART I" To Generate the Programs(G-coded & M-coded) For Various CNC Machines.

7 1 Beginner
Let Start With Beginning..

Tutorials:-Working with Power MILL "PART IV" Finish Machining Strategies.

3 0 Intermediate
Finishing strategies machine the actual component form and where applicable, follow on from the Area Clearance operation. Suitable values are required to control the accuracy and amount of excess material to be left on a component by a tool path. The parameters used for this purpose are called Thickness and Tolerance

IronCAD - Top 10 Tips

3 5 Expert
Ten top tips for IronCAD

Tutorials:-Working with Power MILL " PART I" To Generate the Programs(G-coded & M-coded) For Various CNC Machines.

2 0 Beginner
After Step 12 here the Remain Things you Have to do...:-

When the toolpath is to be verified to be checked for gouges?

1 0 Intermediate
Hello. I hope your answer is yes

How to create a perforated sheet metal

1 1 Intermediate
could be that you want to use rectangular patern. by creating one hole and copying it over the surface of the sheet. i actually never use sheet metal parts but here it goes.

IronCAD - Using the Co-ordinate system to create a section

1 0 Intermediate
Use the Co-Ordinate systems to create a section plane. This is a handy alternative the section tool, as it does not cut the solid model.

problem : powermill changes the orientation of files imoprted in igs format from solidworks

1 0 Intermediate
Don't worry about the orientation just simply rotate it through your mouse. and If you are thinking of wrong axis direction than just follow these steps:-

IronCAD - Linked Cross Sections

0 0 Intermediate
Create independent parts all driven by the one linked cross section

how to reduce time involve in plunge in power mill

0 0 Beginner
There it is, but I need the solid model to Tell you detail process of Reducing the plunge milling.

IronCAD - Multifeature part from one Cross Section

0 0 Intermediate
Create a pipe section with flanges at each end, using one circle to drive the bore diameter with flange OD offset from this.