Tutorials

IronCAD - Top 10 Tips

3 5 Expert
Ten top tips for IronCAD

How to create a perforated sheet metal

1 1 Intermediate
could be that you want to use rectangular patern. by creating one hole and copying it over the surface of the sheet. i actually never use sheet metal parts but here it goes.

IronCAD - Using the Co-ordinate system to create a section

1 0 Intermediate
Use the Co-Ordinate systems to create a section plane. This is a handy alternative the section tool, as it does not cut the solid model.

Is there any chance the 3D Viewer will get "Perspective View Mode" back?

1 0 Intermediate
Follow the below mentioned steps

IronCAD - Linked Cross Sections

0 0 Intermediate
Create independent parts all driven by the one linked cross section

Minimalist Wall Mounts

0 0 Beginner
Hello! im Álvaro Fernández, an artist by heart and a engineer by trade. Im from Concón, a quiet beach city in Chile. In this tutorial Im going to teach you how I make the minimalist stl file I post on this site. Its a begginer tutorial, I encourage to all to try it! you can acomplish it. I use: A pencil. Paper. Rhinoceros 6

IronCAD - Multifeature part from one Cross Section

0 0 Intermediate
Create a pipe section with flanges at each end, using one circle to drive the bore diameter with flange OD offset from this.

3D Printing CAD STL Export Settings for no segments

0 1 Beginner
3D printing is booming–big time. And since most 3D printers accept STL exports, engineers are using the export format more and more. I’ve experimented with 3D printing using different settings of the STL export format. In this Video, I’ll share my experiences with you. For the sake of accuracy, for these tests I used NX 11 and an Anycubic mega X 3D printer. Here is the video tutorial: https://youtu.be/h34M6tFaTpM Please dot forget to schow some support and to subscribe my YT-channel