Tutorials

  • Design & CAD ×
  • IronCAD ×
  • Powershape ×
  • TinkerCAD ×

Tutorial Camera Mold in PowerShape

Sérgio CAD CAM
in Modeling
18 2 Intermediate
Tutorial Camera Injection Mold in PowerShape from Autodesk; Available to download in https://grabcad.com/library/camera-mold-sergio-cad-cam-1 #tutorial #injection #mold #mould #powershape #surface
Powershape injection molde mould mold powershape tutorial

TUTORIAL SOAP BOX MOLD POWERSHAPE

Sérgio CAD CAM
in Modeling
16 0 Intermediate
TUTORIAL SOAP BOX INJECTION MOLD IN POWERSHAPE; Available to Download in Grabcad: https://grabcad.com/library/soap-box-mold-sergio-cad-cam-1 credits to: https://grabcad.com/library/soapbox-7 by https://grabcad.com/v.rajesh-1 #TUTORIAL #MOLD #MOULD #POWERSHAPE #STEPS
Powershape molde mould powershape tutorial injection mold

Make a Motorcycle in TinkerCAD

Mike Harmon
in Modeling
3 0 Beginner
Design a motorcycle in TinkerCAD. Step by Step instructions that are written for middle school aged students. If you have dual screens, watch on one, complete on the other. Otherwise, watch a little, then do a little. If you make something awesome, share an image @HLModtech on Instagram, Facebook or Twitter.
TinkerCAD skills basic easy beginner

IronCAD - Top 10 Tips

Nick
in Modeling
3 5 Expert
Ten top tips for IronCAD
IronCAD hints tips ironcad

scaling in Tinker CAD

Gabriel Gustafson
in Modeling
3 1 Beginner
How to use TinkerCAD.
TinkerCAD

IronCAD - Using the Co-ordinate system to create a section

Nick
in Modeling
2 0 Intermediate
Use the Co-Ordinate systems to create a section plane. This is a handy alternative the section tool, as it does not cut the solid model.
IronCAD section cross

Bottle - PowerShape Reverse Engineering workflow

Didi Widya Utama
in Modeling
2 0 Intermediate
This video shows workflow of Reverse Engineering Process, start from scanning the physical model and surface creation in Powershape. the scanner i used was Roland Picza 3D scanner if someone interested to learn and try , i could send you the stl scanned data file , just write your request in the comments below hope it, enjoy a happy learning. thanks
Powershape powershape engineering reverse study learning modeling 3d tutorial

How to create a perforated sheet metal

Bob Heijningen
in Design & CAD
1 1 Intermediate
could be that you want to use rectangular patern. by creating one hole and copying it over the surface of the sheet. i actually never use sheet metal parts but here it goes.
IronCAD perforations

FREE - TINKERCAD - TUTORIAL

nikhil satpute
in Modeling
1 0 Beginner
Don't need to download any software, it is freely available online This tutorial will help to design 3D blocks very easily , just go through my video lectures on Tinkercad on my youtube channel
TinkerCAD technicaldrawing engineeringdrawing engineering tinkercad

Autodesk TinkerCAD Basics

A VIJAY
in Modeling
1 1 Expert
Hello my name is Vijay and I am a designer in TinkerCAD. This tutorial is to learn the basics of TinkerCAD from Noob to proffesional.You can also ask any questions regarding in the designing of TinkerCAD.
TinkerCAD

IRONCAD Training 01-04 | Drag & Drop Modeling

Emil.Rindell
in Modeling
1 0 Beginner
Four videos that describes the Drag & Drop Modeling basics in IRONCAD.
IronCAD training triball easy cad user friendly beginner 3d cad ironcad

IronCAD - Linked Cross Sections

Nick
in Modeling
0 0 Intermediate
Create independent parts all driven by the one linked cross section
IronCAD section cross linked ironcad structural

IronCAD - Multifeature part from one Cross Section

Nick
in Modeling
0 0 Intermediate
Create a pipe section with flanges at each end, using one circle to drive the bore diameter with flange OD offset from this.
IronCAD mechanical section cross pipe ironcad

Tutorial: How to create a helix along a 3D curve

Yaroslav
in Design & CAD
0 0 Beginner
Look the video. Important moments: - The orientation of cross section - Twist profile angle must be more then 360 Angel: 360*15 = 5400, Where 15 - number of coils Result file: http://grabcad.com/library/tutorial-how-to-create-a-helix-along-a-3d-curve-1
IronCAD 3d ironcad curve helix cord tipsntricks
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.