Tutorials

diverse shape translation to JT or STP

9 2 Intermediate
Have found a way to import / translate easy shape files like 3ds, wrl, skp, stl, ifc and so on into JT or STP. The shape files can have texture or not. My interest was how to get the shape files with texture translated to JT. For this, I use PCon Planner and save as 3DS. After this, import it into MeshLab (single texture file / no layer) and save it as WRL (VRML 2). This is than easy to import into Teamcenter Livecyle Visualisation (TCVis) and save as JT. If you like to have more imported WRL/JT files into TCvis (JT2Go) please rename the texture or the view results in TCVis (JT2Go) are bad, looks like unplaced textures. If you like to export files with not a texture another way is to use. The fast one with no colours is to save as stl and import it into your volume modeller. The longer way is here to import it into PCon after this save as Skp (Sketchup) and now is to use Automapki (~40 $ or € / year sorry no freeware I have found) and save as STP file. The result you can now import into a volume modeller and use it there or (and) save it as JT and many other files too. Hope you like this tutorial a bit. If you have any questions please let me know.

3D Modeling of a Braitenberg Vehicle in 4 Steps using Autodesk 123D Design

2 0 Intermediate
This tutorial is suitable for designers who have a basic knowledge of using the open source product Autodesk 123D Design. The steps to build a Breitenberg vehicle are as follows: 1. Modeling a wheel: a cylinder with a diameter of 2 cm and a height of 0.5 cm is placed in the workspace. Drill a hole in it by drawing a circle with a diameter of 0.3 cm and extruding - 0.5 cm with the Extrude tool. We soften the edges of the cylinder with Fillet Radius: 0.5. 2. Clone the wheel: rotate the resulting wheel 90° along the Z axis and copy it with Ctrl+C and Ctrl+V. 3. Modeling the vehicle body: regarding the design of the vehicle body, there are various options. In this case the author models a classic vehicle, which is most often shown in the bibliographic sources. After drawing and extruding a surface with the desired shape we apply Fillet with radius 35 on the back edge and with 30 on the front edge for a contemporary design (i could provide more images if it is needed). On the selected side edges we successively apply Fillet with a radius of 9. 4. Make a special place for the sensor: it is necessary to select the square plane that is located in the middle of the case and successively apply Sketch > Project, Sketch > Offset and Construct > Extrude with a negative value.

Tutorial: Change color scheme in DraftSight

1 0 Beginner
Change color scheme in Draftsight

Como trocar idioma do Draftsight

0 0 Intermediate
Para redefinir o idioma do sistema.

How to Download & Install Draftsight 2023

0 0 Beginner
How to Download & Install Draftsight 2023

how set the system language

0 0 Intermediate
To set the system language

How to see System Variables list in DraftSight ?

0 0 Intermediate
Use SETVARIABLE command .