Tutorials

  • Design & CAD ×
  • Autodesk 123D ×
  • JT ×
  • GrabCAD Workbench ×

How to convert CAD files in Workbench

Sar Dar
in Design & CAD
131 49 Beginner
How to convert file formats, such as sldprt and sldasm files, to STEP, IGES, STL, Parasolid (.x_t), ACIS (.sat), JT, or VRML (.wrl)
GrabCAD Workbench sldprt vrml jt acis parasolid stl iges step

diverse shape translation to JT or STP

juergen grewe
in Translations
9 2 Intermediate
Have found a way to import / translate easy shape files like 3ds, wrl, skp, stl, ifc and so on into JT or STP. The shape files can have texture or not. My interest was how to get the shape files with texture translated to JT. For this, I use PCon Planner and save as 3DS. After this, import it into MeshLab (single texture file / no layer) and save it as WRL (VRML 2). This is than easy to import into Teamcenter Livecyle Visualisation (TCVis) and save as JT. If you like to have more imported WRL/JT files into TCvis (JT2Go) please rename the texture or the view results in TCVis (JT2Go) are bad, looks like unplaced textures. If you like to export files with not a texture another way is to use. The fast one with no colours is to save as stl and import it into your volume modeller. The longer way is here to import it into PCon after this save as Skp (Sketchup) and now is to use Automapki (~40 $ or € / year sorry no freeware I have found) and save as STP file. The result you can now import into a volume modeller and use it there or (and) save it as JT and many other files too. Hope you like this tutorial a bit. If you have any questions please let me know.
JT jt2go tcvis edge solid paint 3d mashlab pconplanner automapki sketchup

How do i track changes by others?

Sara Sigel
in Design & CAD
5 1 Intermediate
Your partner can upload a new version, leave a sketch, or write a comment to let you know about a change. If you have notifications setup, then you'll get an email when any of these happen. https://grabcad.com/email/edit You can also compare changes between versions, which is very useful. For a visual comparison of what is different from one version to the next, see the steps, below.
GrabCAD Workbench file grabcad cad workbench management version revision

how to draw campbell diagram in ansys pls hlp me

harikrushna dodiya
in Design & CAD
3 0 Intermediate
campbell diagram step start from 9 plz see step 9
GrabCAD Workbench

How can I change picture order after uploading a model ?

shubham gupta
in Design & CAD
2 3 Intermediate
Please go through this tutorial.
GrabCAD Workbench order image gif

3D Modeling of a Braitenberg Vehicle in 4 Steps using Autodesk 123D Design

Yoana Ivanova
in Modeling
2 0 Intermediate
This tutorial is suitable for designers who have a basic knowledge of using the open source product Autodesk 123D Design. The steps to build a Breitenberg vehicle are as follows: 1. Modeling a wheel: a cylinder with a diameter of 2 cm and a height of 0.5 cm is placed in the workspace. Drill a hole in it by drawing a circle with a diameter of 0.3 cm and extruding - 0.5 cm with the Extrude tool. We soften the edges of the cylinder with Fillet Radius: 0.5. 2. Clone the wheel: rotate the resulting wheel 90° along the Z axis and copy it with Ctrl+C and Ctrl+V. 3. Modeling the vehicle body: regarding the design of the vehicle body, there are various options. In this case the author models a classic vehicle, which is most often shown in the bibliographic sources. After drawing and extruding a surface with the desired shape we apply Fillet with radius 35 on the back edge and with 30 on the front edge for a contemporary design (i could provide more images if it is needed). On the selected side edges we successively apply Fillet with a radius of 9. 4. Make a special place for the sensor: it is necessary to select the square plane that is located in the middle of the case and successively apply Sketch > Project, Sketch > Offset and Construct > Extrude with a negative value.
Autodesk 123D breitenberg vehicle

How to upload files to GrabCAD Workbench?

Stephen Nyberg
in Design & CAD
1 1 Beginner
Here is how I created a new Workbench project and a few different ways I uploaded SolidWorks files. This is was also my first time using the upload folders option so I came across a few bugs that I am sure will be worked out but they are not a big deal. Please feel free to leave comments if this worked for you or if you have a different or better way to do it. I will tell you how to start your Workbench project and upload SolidWorks files. I am assuming you know how to create your files. For this tutorial, I will upload a .zip file containing all of the part and assembly files. You can make this many ways but one of the best ways is to use the Pack-and-Go option in SW. Many other CAD programs have a similar option and this makes sure all the required files are included.
GrabCAD Workbench workbench upload

how do I choose a picture (rendering) that will appear first in the library?

Inspire
in Design & CAD
1 0 Intermediate
1yshetynrw7uywru yuuywrywr
GrabCAD Workbench

how to draw campbell diagram in ansys pls hlp me

harikrushna dodiya
in Design & CAD
1 0 Intermediate
in modal analysis go to analysis setting than go rotodynamic check coriollis effect on than do campbell diagram on feed your data and solve it
GrabCAD Workbench

How can I create a new Autodesk Fusion 360 project in GrabCAD Workbench?

Sara Sigel
in Design & CAD
0 1 Intermediate
Here is a quick video tutorial to create a model using the GrabCAD Workbench and Autodesk Fusion 360 integration.
GrabCAD Workbench grabcad new create workbench fusion360

How to disable GrabCad notification on workbench

Tal Katsir
in Design & CAD
0 0 Beginner
simple explanation how to disable GrabCad notification on workbench
GrabCAD Workbench synergy3dmed talkats workbench grabcad notification
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.