Tutorials

How to create spur gear in Siemens NX?

32 5 Intermediate
This tutorial presents the modeling of an external spur gear in Siemens NX. The detailed modeling process is demonstrated on this video: https://youtu.be/pVPjDyOn6R4 UPDATE: At ~ 2:40 leave the Limit options at default (At Point). See the errata video for the reason: https://youtu.be/PUpdlyQcaOs

Complete MTB design in NX

22 3 Beginner
complete mountain bike design

Mold Design in NX 10

13 3 Intermediate
Mold Design in NX 10. Without Mold Wizard and fully parametric.

(VIDEO TUTORIAL) MECHANICAL BIRD Design in UNIGRAPHICS | Flapping wing mechanism design

10 0 Expert
When a bird flaps, as opposed to gliding, its wings continue to develop lift as before, but the lift is rotated forward to provide thrust, which counteracts drag and increases its speed, which has the effect of also increasing lift to counteract its weight, allowing it to maintain height or to climb

(VIDEO TUTORIAL) LAMBORGHINI ENGINE Design in UNIGRAPHICS

10 0 Expert
The Lamborghini V12 refers to the flagship V12 engine used by Lamborghini. Lamborghini has had two generations of V12 engines through their history, both of which were developed in-house. The first-generation Lamborghini V12 was a sixty degree (60°) V12 petrol engine designed by Lamborghini,[1][2] and was the first internal combustion engine ever produced by the firm.

(VIDEO) NX CAD Drafting Tutorials

9 0 Intermediate
Learn basic drafting NXCAD.

Car design in NX

9 1 Beginner
Car design in nx

Siemens NX Mechatronics Concept Designer

9 0 Beginner
nx mechatronics concept designer simulation

Radial engine Animation in NX

9 4 Intermediate
Applications. Radial engines have several advantages for airplanes: They can produce a lot of power. A typical radial engine in a B-17 has nine cylinders, displaces 1,800 cubic inches (29.5 liters) and produces 1,200 horsepower.

diverse shape translation to JT or STP

8 2 Intermediate
Have found a way to import / translate easy shape files like 3ds, wrl, skp, stl, ifc and so on into JT or STP. The shape files can have texture or not. My interest was how to get the shape files with texture translated to JT. For this, I use PCon Planner and save as 3DS. After this, import it into MeshLab (single texture file / no layer) and save it as WRL (VRML 2). This is than easy to import into Teamcenter Livecyle Visualisation (TCVis) and save as JT. If you like to have more imported WRL/JT files into TCvis (JT2Go) please rename the texture or the view results in TCVis (JT2Go) are bad, looks like unplaced textures. If you like to export files with not a texture another way is to use. The fast one with no colours is to save as stl and import it into your volume modeller. The longer way is here to import it into PCon after this save as Skp (Sketchup) and now is to use Automapki (~40 $ or € / year sorry no freeware I have found) and save as STP file. The result you can now import into a volume modeller and use it there or (and) save it as JT and many other files too. Hope you like this tutorial a bit. If you have any questions please let me know.

Roller bracket in NX

8 2 Beginner
Modeling and assembly

Creating scalable associative geometry/features in NX

8 0 Intermediate
Pinion Gear using Through Curves with associative, scaled geometry (NX9)

Drone Design in NX

7 2 Beginner
An unmanned aerial vehicle (UAV) (or uncrewed aerial vehicle,[2] [3]commonly known as a drone) is an aircraft without a human pilot on board and a type of unmanned vehicle. UAVs are a component of an unmanned aircraft system (UAS); which include a UAV, a ground-based controller, and a system of communications between the two. The flight of UAVs may operate with various degrees of autonomy: either under remote control by a human operator, autonomously by onboard computers [4] or piloted by an autonomous robot.[5]

EARTH MOVERS VEHICLE DESIGN | EXCAVATOR DESIGN

7 0 Beginner
EARTH MOVERS VEHICLE DESIGN

Does NX 7.5/8 has any toolbox (e.g to gears and pinion) like in solidworks?

7 0 Beginner
go to start in windows