Tutorials

LUGER 9MM PROJECT

13 0 Intermediate
LUGER 9 mm See video. https://youtu.be/ifvvpdlOeuQ

Onshape Tutorial Exersice

11 0 Intermediate
Sometimes you will not have Solidworks or a similar program installed on your computer. And you may have to make a model immediately. In such situations, Onshape is great. The link to the modeling file from the sample technical drawing is given below. https://cad.onshape.com/documents/51b10db64d8c10d69e04f4da/w/b4cd4b090cea13100d679675/e/741f8ec43a660ff55252cd29

volleyball in Onshape

4 0 Intermediate
I wanted to get to know Onshape better and had a look at the split, transform and pattern command. I repeated this in SolidWorks and it is the same workflow.

Onshape for Absolute Beginners

3 0 Beginner
https://youtu.be/2utLjjkXpIg

How To Create Chess Queen

3 1 Beginner
Chess Queen on OnShape

LAMP DESIGN.

2 0 Beginner
LAMP DESIGN. Light & Shadow. See video: https://www.youtube.com/watch?v=esnyU7ws4Fc

Onshape Exercise 6

2 1 Beginner
Beginner's exercise videos in Onshape.

Exercise 4

2 1 Beginner
Beginner's exercise video in Onshape.

Onshape Exercise 5

2 1 Beginner
Beginner's exercise videos in Onshape.

COVID MASK DESIGN

2 0 Beginner
COVID MASK DESIGN See video: https://youtu.be/dUNSE50tm58

3D Modeling of a Braitenberg Vehicle in 4 Steps using Autodesk 123D Design

2 0 Intermediate
This tutorial is suitable for designers who have a basic knowledge of using the open source product Autodesk 123D Design. The steps to build a Breitenberg vehicle are as follows: 1. Modeling a wheel: a cylinder with a diameter of 2 cm and a height of 0.5 cm is placed in the workspace. Drill a hole in it by drawing a circle with a diameter of 0.3 cm and extruding - 0.5 cm with the Extrude tool. We soften the edges of the cylinder with Fillet Radius: 0.5. 2. Clone the wheel: rotate the resulting wheel 90° along the Z axis and copy it with Ctrl+C and Ctrl+V. 3. Modeling the vehicle body: regarding the design of the vehicle body, there are various options. In this case the author models a classic vehicle, which is most often shown in the bibliographic sources. After drawing and extruding a surface with the desired shape we apply Fillet with radius 35 on the back edge and with 30 on the front edge for a contemporary design (i could provide more images if it is needed). On the selected side edges we successively apply Fillet with a radius of 9. 4. Make a special place for the sensor: it is necessary to select the square plane that is located in the middle of the case and successively apply Sketch > Project, Sketch > Offset and Construct > Extrude with a negative value.

Exercise 1

2 1 Beginner
Exercise videos in Onshape.

Exercise 2

2 1 Beginner
Beginner's exercise video in Onshape.

How to do a TRIFOIL KNOT DESIGN

1 1 Beginner
See video. https://www.youtube.com/edit?o=U&video_id=ki-eW7W6Bnc

PLASTIC COVER & MOLD

1 2 Beginner
PLASTIC COVER & MOLD See video: https://youtu.be/GIDRJFsyOpY