Tutorials

LUGER 9MM PROJECT

13 0 Intermediate
LUGER 9 mm See video. https://youtu.be/ifvvpdlOeuQ

Tutorials:-Working with Power MILL " PART I" To Generate the Programs(G-coded & M-coded) For Various CNC Machines.

8 1 Beginner
Let Start With Beginning..

Tutorials:-Working with Power MILL "PART IV" Finish Machining Strategies.

4 0 Intermediate
Finishing strategies machine the actual component form and where applicable, follow on from the Area Clearance operation. Suitable values are required to control the accuracy and amount of excess material to be left on a component by a tool path. The parameters used for this purpose are called Thickness and Tolerance

Tutorials:-Working with Power MILL " PART II" Machining Setup

3 0 Beginner
Here is the Next Part of Working with Power Mill.. Follow the Steps and You will found your way with Power Mill. Some text are Referenced from Book and Online Training Tutorials Thanks and Enjoy..!!

Tutorials:-Working with Power MILL " PART I" To Generate the Programs(G-coded & M-coded) For Various CNC Machines.

2 0 Beginner
After Step 12 here the Remain Things you Have to do...:-

LAMP DESIGN.

2 0 Beginner
LAMP DESIGN. Light & Shadow. See video: https://www.youtube.com/watch?v=esnyU7ws4Fc

When the toolpath is to be verified to be checked for gouges?

2 0 Intermediate
Hello. I hope your answer is yes

COVID MASK DESIGN

2 0 Beginner
COVID MASK DESIGN See video: https://youtu.be/dUNSE50tm58

Tutorials:-Working with Power MILL "PART IV" Finish Machining Strategies.

2 0 Intermediate
Raster, Radial, Spiral, and Pattern Finishing. Introduction. This section will cover Finishing strategies created by the downward projection of a Pattern, which include four types, Raster, Radial, Spiral and (user defined) Pattern. PowerMILL generates the toolpaths by projecting a wireframe form down the Z-axis onto the model. The standard patterns applied in Raster, Radial, and Spiral are achieved by entering values directly into the Finishing Form. The resultant Pattern can be displayed by selecting Preview before executing the command by selecting Apply. The Pattern option requires a user-defined geometric form (active Pattern), which is projected down Z onto the model as a tool path.

Tutorials:-Working with Power MILL "PART III" 3D Area Clearance.

2 0 Beginner
next here

How to do a TRIFOIL KNOT DESIGN

1 1 Beginner
See video. https://www.youtube.com/edit?o=U&video_id=ki-eW7W6Bnc

problem : powermill changes the orientation of files imoprted in igs format from solidworks

1 0 Intermediate
Don't worry about the orientation just simply rotate it through your mouse. and If you are thinking of wrong axis direction than just follow these steps:-

Is there any chance the 3D Viewer will get "Perspective View Mode" back?

1 0 Intermediate
Follow the below mentioned steps

PLASTIC COVER & MOLD

1 2 Beginner
PLASTIC COVER & MOLD See video: https://youtu.be/GIDRJFsyOpY

Tutorials:-Working with Power MILL "PART V" Toolpath Leads and Links

1 0 Intermediate
Hello Friends, This tutorial continues for power mill Guidance.