Tutorials

Tutorial for Designing Engine case

239 45 Expert
This tutorial contains step by step procedure to create engine case using any software, this model especially created using CREO parametric Click here for my other files https://grabcad.com/tutorials/boolean-operations-powercopy-in-catia

Tutorial: Share Your Skills, Create a Tutorial on GrabCAD

7 7 Beginner
This is how you can create tutorials for the GrabCAD community!

Tutorial: How to use Style command in PTC Creo Parametric?

6 7 Intermediate
Tutorial: How to use Style command in PTC Creo Parametric?

tutorial 6 ( ansys workbench ) / ( cutting tools simulation

15 6 Intermediate
just be aware of that the question input as if ( speed , time , dimension ) is not real it mean you can't use it as academic project . i just wanted to show you the processing of cutting tools simulation therefore with alter input data you can use it as real project . for real input data you can use https://grabcad.com/library/cutting-tools-simulation-1

How to create a spur gear with invloute profile using Creo 2.0

7 5 Beginner
In this I will show how to model a simple spur gear with involute profile. Involute profile generated by using Parametric equation. Follow images i have uploaded. You can download all images. All images have a number in sequence. If you found any difficulties mail me >>> sathishkumarc14@gmail.com i will send you a pdf file.

Create Basketball Using CREO 3.0

14 4 Expert
Software: PTC CREO PARAMETRIC 3.0

Does not make standard parts,download them.

12 4 Beginner
Standard parts are not modeled ! Go to side : https://www.tracepartsonline.net/(S(nqfxiakz3pdcrzuhft0mp20g))/content.aspx?home=1&class=TRACEPARTS and FREE download all standard parts ,for all cad software.

Tutorial - 2D Truss analysis in Mechanical APDL (ANSYS) Part 2?

3 3 Beginner
In general, a finite element solution may be broken into the following three stages. 1. Preprocessing: defining the problem; - Define keypoints/lines/areas/volumes - Define element type and material/geometric properties - Mesh lines/areas/volumes as required 2. Solution: assigning loads, constraints and solving; 3. Postprocessing: - Lists of nodal displacements - Element forces and moments - Deflection plots - Stress contour diagrams In this tutorial we will go through second and third step.

[Tutorial Video] Basics 3d Modeling Exercise

12 4 Beginner
In this video, I am creating a simple 3d model from the 2d drawing. But I have separately explained on how to approach a 3d model while you are facing an interview tool test. I have step by step explained my modeling process and hope you enjoy it :) Blend, Hole, Pattern etc are few commands included.

Tutorial : How to model involute gear in Creo 3.0

18 3 Beginner
How to model involute (evolvent) gear in Creo 3.0

ANSYS Video Tutorials

2 3 Beginner
ANSYS Mechanical APDL Video Tutorials

How to import CAD file into ANSYS Fluent?

1 3 Intermediate
convert your file into neutral format and import it else open your cad configuration in ansys than check it your solid works and other software is click on or not. if not than click on.

Basic Symbols Used in Engineering Drawings

10 3 Beginner
Learn about the ways these common features are described in drawings. Counterbore Countersink Spotface Depth Diameter Radius I should also mention that I did not create this course, I just found it online and thought it was pretty well done. https://www.wisc-online.com/learn/career-clusters/stem/eng16204/basic-symbols-used-in-engineering-drawings

Tutorial: How to model self intersecting Möbius strip

20 3 Beginner
Create object like mobius strip is simple, and should be divided into separate operations.

Tutorials on Injection Mould Designing

3 3 Beginner
Requested by Ganesh, Lifter's and slider's