Tutorials

how to perform analysis test on ansys software

12 1 Intermediate
This is modal analysis of impeller step

Tutorial on Modeling and Simulation of standard gear

6 1 Intermediate
Tutorial on Modeling and Simulation of standard gear...

Creating a Worm Wheel in Creo Parametric 1.0

5 0 Beginner
Here's the answer for it..

Tutorial: How to add exploded view in drawing?

5 0 Intermediate
How to add exploded view in drawing?

How to change from inch im mm in creo 2.0?

5 0 Beginner
tutorial: see the img.

Sweep with multiple sections

3 0 Beginner
For this we have to use swept blend command.

Tutorial - how to make a spiral sphere

3 0 Beginner
This tutorial was compiled with Creo Elements / Direct Express to implement a model similar to my file: http://grabcad.com/library/spiral-sphere You can download a free fully functional copy of Creo from PTC site: http://www.ptc.com/products/creo-elements-direct/modeling-express/ Creo is completely "history-free" and uses the so-called "explicit modeling".

Tutorial - Making text emboss on the curved surface in Creo Elements/Pro aka Pro Engineer Wildfire?

3 1 Beginner
Here is the tutorial.

Tutorial - Modeling Flower in Creo Element aka Pro/Engineer using Surfacing method 2?

2 0 Beginner
Here is the tutorial.

Top 5 CAD file formats to use!

2 0 Beginner
Link to YouTube video I made about the 5 best CAD file types to use.

Tutorial - Modeling rope in Creo Elements aka Pro/E

2 0 Beginner
Steps for creating a rope in creo parametric 1.0

Tutorial: How to change the units from inch to mm in CREO?

2 0 Intermediate
ja sam u Creo Parametric 2.0 menjao ovako.. C:\Program Files\PTC\Creo 2.0\Common Files\M070\creo_standards\zatim pokrenuo configure i odabrao 5 (vidi sliku)

3D Modeling of a Braitenberg Vehicle in 4 Steps using Autodesk 123D Design

2 0 Intermediate
This tutorial is suitable for designers who have a basic knowledge of using the open source product Autodesk 123D Design. The steps to build a Breitenberg vehicle are as follows: 1. Modeling a wheel: a cylinder with a diameter of 2 cm and a height of 0.5 cm is placed in the workspace. Drill a hole in it by drawing a circle with a diameter of 0.3 cm and extruding - 0.5 cm with the Extrude tool. We soften the edges of the cylinder with Fillet Radius: 0.5. 2. Clone the wheel: rotate the resulting wheel 90° along the Z axis and copy it with Ctrl+C and Ctrl+V. 3. Modeling the vehicle body: regarding the design of the vehicle body, there are various options. In this case the author models a classic vehicle, which is most often shown in the bibliographic sources. After drawing and extruding a surface with the desired shape we apply Fillet with radius 35 on the back edge and with 30 on the front edge for a contemporary design (i could provide more images if it is needed). On the selected side edges we successively apply Fillet with a radius of 9. 4. Make a special place for the sensor: it is necessary to select the square plane that is located in the middle of the case and successively apply Sketch > Project, Sketch > Offset and Construct > Extrude with a negative value.

Tutorial: Circular Welded Helical Spring

2 0 Beginner
Now Here is the solution to this problem.. Download Model: http://grabcad.com/library/circular-helical-spring

Tutorial - Modeling rope in Creo Elements aka Pro/E

1 0 Beginner
For making simple bended rope we have to follow these steps. 1 Make 4 cylinderical extrusions. 2 Twist them. 3 Bend them.