Tutorials

  • Drafting ×
  • Dimensioning / Tolerancing ×
  • Simulation & CAE ×
  • KeyCreator ×
  • SOLIDWORKS ×

Some concepts about DIN 5480 spline dimension Part 1

Carlos Soler
in Dimensioning / Tolerancing
35 8 Expert
For some questions that I received. I will upload some tutorials about DIN 5480 dimensions. This is a tutorial explaining some concepts on dimensions of the splines ruled by DIN 5480
SOLIDWORKS clearance tolerance reference diameter dimension din 5480

How to insert a picture in SOLIDWORKS?

Karajko CAD
in Drafting
20 3 Beginner
How to insert a picture in SOLIDWORKS?
SOLIDWORKS picture sketch solidworks

How to copy sketch to a different plane in SOLIDWORKS?

Karajko CAD
in Drafting
5 3 Beginner
How to copy sketch to different plane in SOLIDWORKS?
SOLIDWORKS planes copy sketch solidworks

Add Your Own Custom Logo To A Drafting Sheet in Solidworks

Russell Everard
in Drafting
2 2 Intermediate
A step by step guide on how to get great results when creating and inserting a custom logo design into a drafting boarder in solid works. This process can be a minefield full of issues. I find that this is the best method so that you won't have any problems inserting pictures or logos disappearing when saving on to DWG,DXF or PDF formats.
SOLIDWORKS custom drafting solidworks logo

Some concepts about DIN 5480 spline dimension Part 2

Carlos Soler
in Dimensioning / Tolerancing
12 3 Expert
Continuation of part 1. https://grabcad.com/tutorials/some-concepts-about-din-5480-spline-dimension-part-1
SOLIDWORKS teeth dimension 5480 din

Some concepts about DIN 5480 spline dimension Part 3

Carlos Soler
in Dimensioning / Tolerancing
21 0 Expert
In this tutorial, I will explain the concept of addendum correction (modification) and how is applied to DIN 5480 splines
SOLIDWORKS joint connection gear modification correctio addendum 5480 din

How to turn off visibility of relations in SolidWorks?

Karajko CAD
in Dimensioning / Tolerancing
1 0 Beginner
How to turn off visibility of relations in SolidWorks?
SOLIDWORKS relations solidworks

Perspective Views on Drawings at Solidworks

Andrey Gran
in Drafting
10 3 Beginner
Step by step Creating Perspective Views on Drawings at Solid Works
SOLIDWORKS drawing view perspective

How to use Swept Boss/Base Feature - SolidWorks Tutorial

Tech Hawk
in Drafting
2 0 Beginner
In this tutorial you will create swept part using Swept Boss/Base tool. 1.Click New. Click Part,OK. 2.Click Top Plane and click on Sketch. 3.Click Circle and sketch a circle origin as it center. Click Smart Dimension, dimension sketched circle diameter as your wish if you want 4.Exit Sketch. 5.Take a plane normal to spline end (or Click on Front Plane and click Sketch.) 6.Click on View Orientation-Normal To. 7.Zoom out the sketch, click on Spline and sketch a curve as sketched below. 8.Exit Sketch. 9.Click View Orientation--Isometric. 10. Click Features-Swept Boss/Base. For swept profile select Sketch1 (circle) and for path click on Sketch2 (curve). and . Done!
SOLIDWORKS tutorial path profile boss swept hawk tech solidworks

How to Switch Angles of Projection in SolidWorks Drawings

Usman Akhtar
in Dimensioning / Tolerancing
1 0 Beginner
In this solidworks drawings tutorial you will learn how to change first or third angle of projection in settings of solidworks.
SOLIDWORKS solidworks projection angle

Single Inspection Dimension for Holes

Stephen Nyberg
in Dimensioning / Tolerancing
6 1 Beginner
I was having a hard time figuring out a good way to dimension a hole with both the diameter and depth of a hole with GD&T in a singe dimension. This dimension also required inspection so I wanted the inspection circle around the dimension and have the properties linked to the model. I did a lot of searching on the internet and did not find a good solution. Here is my solution. please leave your comments if you have a better way to do this.
SOLIDWORKS gd-t hide-show annotations note drawing dimension hole inspection

Tutorial 1. Configuraciones de croquis y trabajo de unidades de medida.

Daniel Loera
in Drafting
0 2 Beginner
Solidworks 2015 tutorial Universidad Autónoma de Aguascalientes - Campus Sur Ingeniería en Diseño Mecánico IDM. Daniel Martínez
SOLIDWORKS drawings solidworks beginner tutorial

(VIDEO) How to Size Isometric View (3D View) Detailing - Solidworks

Infinity Projetos Brasil
in Dimensioning / Tolerancing
5 0 Beginner
WATCH THE VIDEO TEACHING BELOW
SOLIDWORKS measure drafiting size dimension view isometric detailing solidworks

Solidworks Basit Çizimler

muhammed gülşen
in Drafting
0 0 Beginner
Simple parts drawings and technical drawings for engineers and enthusiasts who have just joined solidworks.
SOLIDWORKS 3d 2d solidworks

making cone sheet metal in solidworks

taufik .
in Drafting
0 0 Intermediate
make cone in solidworks
SOLIDWORKS
White Stratasys Logo White GrabCAD Logo
© 2024 Stratasys Inc.
ABOUT US
RESOURCES
SOCIAL
Streamline Pro
Control
Print
Shop
PARTNERS
COMMUNITY
Contact Us Website Terms of Use Software Terms of Use Privacy policy Trademarks Your Data on GrabCAD
The Computer-Aided Design ("CAD") files and all associated content posted to this website are created, uploaded, managed and owned by third-party users. Each CAD and any associated text, image or data is in no way sponsored by or affiliated with any company, organization or real-world item, product, or good it may purport to portray.