Tutorials

Cap screws and machine screws

64 12 Intermediate
Cap screws and machine screws are similar in shape, differing only in their relative sizes. Machine screws are usually smaller in size, compared to cap screws. These are used for fastening two parts, one with clearance hole and the other with tapped hole. The clearance of the unthreaded hole need not be shown on the drawing as its presence is obvious. Figure 5.24 shows different types of cap and machine screws, with proportions marked Cap screws are produced in finish form and are used on machines where accuracy and appearance are important. As cap screws are inferior to studs, they are used only on machines requiring few adjustments and are not suitable where frequent removal is necessary. These are produced in different diameters, upto a maximum of 100 mm and lengths 250 mm. Machine screws are produced with a naturally bright finish and are not heat treated. They are particularly adopted for screwing into thin materials and the smaller ones are threaded throughout the length. They are used in fire-arms, jigs, fixture and dies. They are produced in different diameters upto a maximum of 20 mm and lengths upto 50 mm.

Project Manager

12 0 Expert
Hello, I have been working professionally on technical drawing and design since 1993 I have worked on a wide variety of projects. I am a freelancer Nice to talk and learn with everyone. f.sogukkuyu@gmail.com

[EPS 04] Cara membuat Etiket Gambar Teknik | Autodesk Inventor

3 0 Beginner
Cara membuat Etiket Gambar Teknik dengan Autodeks Inventor

Create blue print by Autodesk Inventor

2 1 Intermediate
In this tutorial, study how to create a blue print by Autodesk inventor.

Sketchup to Inventor-How to export SketchUp to Inventor-convert Google sketchup to Autodesk Inventor

1 1 Beginner
see the video below

Convertir Archivo de Sketchup a Inventor exportación e importe Español

1 0 Beginner
mira el video a continuación

Using Sketch in Inventor Assembly Parts.

1 0 Beginner
1. Create a sketch from the assembly parts. 2. Build new parts by referring to sketches.

Como exportar do Sketchup para o Inventor Do Google Sketchup para o Autodesk Inventor

1 0 Beginner
veja o vídeo abaixo

Autodesk Inventor Tutorial Adding colour

0 0 Beginner
https://www.youtube.com/watch?v=iickqMM7mV0

Inventor Delete Constraints.

0 1 Beginner
Inventor Delete Constraints.

Socket Drawing

0 0 Beginner
Hydraulic Floor Jack's Socket Drawing Tutorial

Pin 4 (136 mm) Drawing

0 0 Beginner
Hydraulic Floor Jack's Pin 4 Drawing Tutorial

Castor Nuts Drawing

0 0 Beginner
Hydraulic Floor Jack's Castor Nuts Drawing Tutorial

Leveling Arm Drawing

0 0 Beginner
Hydraulic Floor Jack Leveling Arm Drawing

Hydraulic Floor Jack Drawing

0 0 Beginner
Hydraulic Floor Jack Drawing